BACK DOOR COURTESY SWITCH INSTALLATION

PROCEDURE

1. INSTALL BACK DOOR LOCK ASSEMBLY

   Tip:

   Make sure to remove the string before installing a new back door lock assembly.

   1. Apply MP grease to the sliding parts of the back door lock assembly.

   2. Install the back door lock assembly with the 2 bolts.

      12.5 N*m

      127 kgf*cm

      9 ft.*lbf

   3. Connect the connector.

2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY

   Click here

3. INSTALL DOOR PULL HANDLE

   Click here

4. INSTALL BACK DOOR SIDE GARNISH RH (w/ Back Door Side Garnish)

   Click here

5. INSTALL BACK DOOR SIDE GARNISH LH (w/ Back Door Side Garnish)

   Click here

6. INSTALL BACK DOOR UPPER TRIM PANEL ASSEMBLY (w/ Back Door Side Garnish)

   Click here

7. INSTALL BACK DOOR UPPER TRIM PANEL ASSEMBLY (w/o Back Door Side Garnish)

   Click here