MANUAL TRANSAXLE OIL REPLACEMENT

PROCEDURE

1. REMOVE REAR ENGINE UNDER COVER LH

   Click hereClick hereClick hereClick here

2. DRAIN MANUAL TRANSAXLE OIL

   1. 

      *1	Manual Transmission Filler Plug
      *2	Manual Transmission Drain Plug

      Remove the manual transmission filler plug and gasket from the manual transmission case.

   2. Using a 10 mm hexagon socket wrench, remove the manual transmission drain plug and gasket to drain the manual transaxle oil.

   3. Using a 10 mm hexagon socket wrench, install the manual transmission drain plug and a new gasket to the front transaxle case.

      45 N*m

      459 kgf*cm

      33 ft.*lbf

3. ADD MANUAL TRANSAXLE OIL

   1. 

      *a	0 to 5 mm (0 to 0.197 in.)

      Add manual transaxle oil until the oil level is between 0 and 5 mm (0.197 in.) from the bottom lip of the manual transmission filler plug opening.

      Manual Transaxle Oil

      "Toyota Genuine Manual Transmission Gear Oil LV GL-4 and SAE 75W" or "API GL-4 and SAE 75W"

      Standard Capacity

      2.4 liters (2.5 US qts, 2.1 Imp. qts)

   2. Install the manual transmission filler plug and a new gasket to the manual transmission case.

      39.2 N*m

      400 kgf*cm

      29 ft.*lbf

      Note:

      • When adding manual transaxle oil, make sure that the vehicle is level.

      • An excessively large or small amount of manual transaxle oil may cause problems.

      • After adding manual transaxle oil, drive the vehicle and recheck the oil level.

4. INSPECT FOR OIL LEAK

5. INSTALL REAR ENGINE UNDER COVER LH

   Click hereClick hereClick hereClick here