THEFT DETERRENT


  1. OUTLINE


    1. The theft deterrent system is controlled by the main body ECU. The theft deterrent system will operate when an attempt is made to forcibly enter the vehicle or open the engine hood, when the battery terminals are removed and reconnected, when objects moving in the cabin are detected*1 or when the vehicle is determined to be sloping*2.

    2. The system consists of power door lock control system parts, entry and start system parts, a security horn, a theft warning radar sensor assembly*1, a tilt sensor*2, a theft warning siren assembly*3, a print pattern type glass breakage sensor*4 and a security indicator light.


      • *1: Models with theft warning radar sensor assembly

      • *2: Models with tilt sensor

      • *3: Models with theft warning siren assembly

      • *4: Models with glass breakage sensor

  2. SPECIFICATION

    Warning Method Hazard Light Flashes
    Vehicle Horn Sounds a warning in approx. 0.4-second cycles
    Security Horn Sounds a warning in approx. 0.4-second cycles
    Theft Warning Siren Sounds a warning at the cycle of the theft warning siren assembly
    Door Lock Motor Locks
    Warning Time Approx. 27.5 seconds

  3. PRECAUTION


    1. Ignition Switch Expressions


      1. The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

        Expression

        Ignition Switch

        (Position)

        Engine Switch

        (Condition)
        Ignition Switch off LOCK Off (Lock)
        Ignition Switch ACC ACC On (ACC)
        Ignition Switch ON ON On (IG)
        Engine Start START On (Start)