NAME PLATE ATTACHMENT POSITION


  1. Heat the double-sided tape remaining on the body with an infrared lamp or equivalent.

    Tech Tips

    Heat the tape to 40 to 60°C for approximately 1 to 2 minutes.

  2. Wipe off the remaining double-sided tape using a clean cloth or equivalent.

    Note

    If a name plate is installed without thoroughly removing the remaining double-sided tape from the body, the name plate will not adhere properly. Make sure to thoroughly wipe off the double-sided tape.

  3. After cleaning the installation area of the body with degreasing agent, attach the name plate to the position shown in the illustration.

    Tech Tips

    The working environment should be 20°C when installing the name plate. If the working environment is below 20°C, heat the installation area of the body to 20 to 30°C and then install the name plate.

A01KY0BC01
*A for A Deck - -
*1 NO. 2 TAIL GATE MARK *2 REAR NAME PLATE
● Non-reusable part - -
A01KXUCC01
*A for J Deck - -
*1 NO. 2 TAIL GATE MARK *2 REAR NAME PLATE
● Non-reusable part - -
A01KXRUC02
*A for A Deck - -
*1 TAIL GATE MARK - -
● Non-reusable part - -
A01KXRZC01
*A for J Deck - -
*1 TAIL GATE MARK - -
● Non-reusable part - -
A01KY2GC01
*A for A Deck - -
*1 NO. 3 TAIL GATE MARK - -
● Non-reusable part - -
A01KY22C01
*A for J Deck - -
*1 NO. 3 TAIL GATE MARK - -
● Non-reusable part - -
A01KXPWC01
*1 FRONT DOOR NAME PLATE *2 FRONT DOOR NO. 2 NAME PLATE
● Non-reusable part - -

  1. NO. 2 TAIL GATE MARK

    A01KY24C02
    *A for A Deck
    *B for J Deck
    *a Reference Values

  2. REAR NAME PLATE

    A01KXUEC02
    3. *A for A Deck
    *B for J Deck
    *a Reference Values

  • TAIL GATE MARK


    1. for A Deck:

      A01KY1BC01
    • *a Reference Values - -
  • A01KXQGC01
    • *a Reference Values

    for J Deck:

  • NO. 3 TAIL GATE MARK


    1. for A Deck:

      A01KY0LC01
    • *a Reference Values *b Application Sheet

  • for J Deck:

    A01KXXOC01
    • *a Reference Values *b Application Sheet

  • FRONT DOOR NAME PLATE

    A01KXPGC02
    • *A for LH Side
    *B for RH Side
    *a Reference Values
    *b Edge of Curved Surface

  • FRONT DOOR NO. 2 NAME PLATE

    A01KXQMC01
    • *A for LH Side
    *B for RH Side
    *a Reference Values
    *b Edge of Curved Surface