TCM INSTALLATION

PROCEDURE


  1. INSTALL TCM


    1. Install the TCM to the transaxle.

    2. A004SQME02

      Install and tighten the 2 bolts in the order shown in the illustration.

      Torque:
      11 N*m  { 115 kgf*cm, 8 ft.*lbf }
    3. A004MW3

      Connect the connector to the TCM.

    4. Turn the lock lever until the claw of the connector makes a connection sound and secure the connector with the lock lever.

  2. INSTALL REAR ENGINE UNDER COVER LH

    Click here

  3. INSTALL BATTERY CARRIER

    Click here

  4. INSTALL BATTERY


    1. Install the battery tray.

    2. Install the battery.

    3. Install the battery clamp with the bolt and tighten the nut.

      Torque:
      for bolt
      17 N*m  { 168 kgf*cm, 12 ft.*lbf }
      for nut
      3.5 N*m  { 36 kgf*cm, 31 in.*lbf }

    4. Connect the cable to the positive (+) battery terminal.

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. INSTALL RADIATOR SUPPORT OPENING COVER

    Click here