CHECK COMBINATION METER
Disconnect the D66 meter connector.
Measure the resistance and voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| D66-40 (B) - Body ground | W - Body ground | Combination meter +B line | Always | 11 to 14 V |
| D66-39 (IG+) - Body ground | P - Body ground | Combination meter IG line | Ignition switch ON | 9.5 to 14 V |
| D66-21 (ET) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
Reconnect the D66 meter connector.
Measure the voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| D66-1 (RLMT) - Body ground | Y - Body ground | Rear seat belt LH warning light signal | Rear seat belt LH fastened within 30 seconds of opening rear door with ignition switch ON | 11 to 14 V |
| Rear seat belt LH unfastened within 30 seconds of opening rear door with ignition switch ON | Below 1 V | |||
| D66-2 (RCMT) - Body ground | P - Body ground | Rear seat center belt warning light signal | Rear seat center belt fastened within 30 seconds of opening rear door with ignition switch ON | 11 to 14 V |
| Rear seat center belt unfastened within 30 seconds of opening rear door with ignition switch ON | Below 1 V | |||
| D66-3 (RRMT) - Body ground | B - Body ground | Rear seat belt RH warning light signal | Rear seat belt RH fastened within 30 seconds of opening rear door with ignition switch ON | 11 to 14 V |
| Rear seat belt RH unfastened within 30 seconds of opening rear door with ignition switch ON | Below 1 V | |||
| D66-7 (PKBI) - Body ground | L - Body ground*1 P - Body ground*2 |
Front passenger seat belt signal | Front passenger seat occupied, seat belt fastened | Below 1 V |
| Front passenger seat occupied, seat belt unfastened | 11 to 14 V | |||
| D66-24 (MSD) - Body ground | Y - Body ground | Rear seat belt LH signal | Rear seat belt LH fastened | Below 1 V |
| Rear seat belt LH unfastened | 11 to 14 V | |||
| D66-25 (MSTI) - Body ground | P - Body ground | Rear seat center belt signal | Rear seat center belt fastened | Below 1 V |
| Rear seat center belt unfastened | 11 to 14 V | |||
| D66-26 (MSFM) - Body ground | B - Body ground | Rear seat belt RH signal | Rear seat belt RH fastened | Below 1 V |
| Rear seat belt RH unfastened | 11 to 14 V |
*1: for LHD
*2: for RHD
CHECK MAIN BODY ECU (INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY)
Disconnect the D79, DE, DF, DG and DH main body ECU (instrument panel junction block assembly) connectors.
Measure the resistance and voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| DE-17 (GND1) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| DG-1 (ALTB) - Body ground | W - Body ground | Battery (ECU power source) | Always | 11 to 14 V |
| DH-12 (BECU) - Body ground | W - Body ground | Battery (ECU power source) | Always | 11 to 14 V |
| DH-13 (IG) - Body ground | G - Body ground | Ignition power supply | Ignition switch ON | 9.5 to 14 V |
| DF-5 (ACC) - Body ground | W - Body ground | Ignition power supply | Ignition switch ACC | 11 to 14 V |
| D79-8 (LCTY) - Body ground | SB - Body ground | Rear door courtesy light switch LH signal | Rear LH door open | Below 1 Ω |
| Rear LH door closed | 10 kΩ or higher | |||
| DE-19 (RCTY) - Body ground | LG - Body ground | Rear door courtesy light switch RH signal | Rear RH door open | Below 1 Ω |
| Rear RH door closed | 10 kΩ or higher |
Reconnect the D79, DE, DF, DG and DH main body ECU (instrument panel junction block assembly) connectors.
Measure the voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| D79-26 (DBKL) - Body ground | P - Body ground*1 L - Body ground*2 |
Driver seat belt warning signal | Driver seat belt fastened | 11 to 14 V |
| Driver seat belt unfastened | Below 1 V |
*1: for LHD
*2: for RHD