FRONT DOOR OUTSIDE MOULDING INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. INSTALL FRONT DOOR LOWER OUTSIDE MOULDING SUB-ASSEMBLY LH

    Tech Tips

    When installing the front door lower outside moulding sub-assembly LH, heat the front door panel and front door lower outside moulding sub-assembly LH using a heat light.

    Standard
    Item Temperature
    Front Door Panel 40 to 60°C (104 to 140°F)
    Front Door Lower Outside Moulding Sub-assembly LH 20 to 30°C (68 to 86°F)

    Note

    Do not heat the front door panel and front door lower outside moulding sub-assembly LH excessively.


    1. Clean the front door panel surface.


      1. Using a heat light, heat the front door panel surface.

      2. Remove the double-sided tape from the front door panel surface.

      3. Wipe off any tape adhesive residue with cleaner.

    2. A01HGE1C01
      *1 Double-sided Tape

      Install the front door lower outside moulding sub-assembly LH.


      1. Using a heat light, heat the front door lower outside moulding sub-assembly LH and the front door panel surface.

      2. Remove the peeling paper from the face of the front door outside moulding upper pad.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Attach the 7 clips and double-sided tape to install the front door lower outside moulding sub-assembly LH.

        Tech Tips

        Press the front door lower outside moulding sub-assembly LH firmly to install it.

    3. A01HH8G

      Attach the 6 claws.