CONDENSER(except 1WW, 8NR-FTS) ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT CONDENSER WITH RECEIVER ASSEMBLY

   1. If the condenser with receiver assembly fins are dirty, clean them with water and dry with compressed air.

      Note:

      Do not damage the condenser with receiver assembly fins.

   2. If any condenser with receiver assembly fins are bent, straighten them using a screwdriver or pliers.

2. INSPECT FOR REFRIGERANT LEAK

   1. Using a halogen leak detector, check pipe joints for refrigerant leaks.

   2. If a refrigerant leak is detected in a joint, check the torque of the joint.