INTAKE SYSTEM DETAILS INTAKE MANIFOLD

  1. CONSTRUCTION

    1. The intake manifold is made of plastic to reduce the weight and the amount of heat transferred from the cylinder head sub-assembly. As a result, it has become possible to reduce intake air temperature and realize high intake volumetric efficiency.

      W115784C01

      *1

      No. 2 Intake Manifold To Head Gasket

      *2

      No. 1 Intake Manifold Insulator

      *3

      No. 1 Intake Manifold To Head Gasket

      *4

      Intake Manifold

      *5

      Vacuum Sensor Assembly

      -

      -

      *a

      No. 1 Intake Manifold Insulator Cross Section

      *b

      From EGR Valve Assembly

      *c

      Through Holes For Exhaust Gas

      -

      -