SEAT VIBRATION SYSTEM OPERATION CHECK


  1. CHECK FRONT SEAT BASIC FUNCTION (w/ Front Refreshing Seat)

    Tech Tips

    If the passenger seat is unoccupied, the function will not operate.


    1. Turn the engine switch on (IG).

    2. Turn the integration control and panel assembly (navigation operation screen call switch) ON.

    3. Select "Driver Seat Refresh" or "Passenger Seat Refresh" on the multi-display using the touch pad on the remote touch.

    4. Check that the front refresh seat function operates when either the "Centripetal", "Centrifugation", "Upper Body", "Lower Body" or "Lower Back" course is selected on the multi-display.

    5. Check that the strength is adjusted when the "Level UP switch" or "Level DOWN switch" is selected on the multi-display.

    6. Check that the front refresh seat function stops when "Stop" is selected on the multi-display.

      Tech Tips

      If "Stop" is not selected, the operation will stop automatically 15 minutes after starting.

  2. CHECK REAR SEAT BASIC FUNCTION


    1. Turn the engine switch on (IG).

    2. Touch "Relaxation" on the rear power seat switch (rear multi operation panel) home screen on the rear seat center armrest assembly.

    3. Touch "Left Seat" or "Right Seat".

    4. Check that the rear refresh seat function operates when either the "Whole Body", "Whole Body Stretch", "Whole Body Simple", "Upper Body", "Lower Body, "Shoulders" or "Lower Back" course is selected on the multi-display.

    5. Check that the strength is adjusted when the "Level UP switch" or "Level DOWN switch" is touched.

    6. Check that the temperature function operates when "Shoulders and Lower Back Warming" is touched and set to ON (indicator illuminates).

    7. Check that the rear refresh seat function stops when "OFF" is touched.

      Tech Tips

      If "OFF" is not selected, the operation will stop automatically 30 minutes after starting.