ENGINE OIL TEMPERATURE SENSOR REMOVAL

CAUTION / NOTICE / HINT

CAUTION:


  • Prolonged and repeated contact with engine oil will result in the removal of natural oils from the skin, leading to dryness, irritation and dermatitis. In addition, used engine oil contains potentially harmful contaminants which may cause skin cancer.

  • Wear protective clothing and gloves. Avoid contact with used oil. If contact occurs, wash your skin thoroughly with soap or waterless hand cleaner. Never use gasoline, thinners, or solvents to wash the skin.

  • In order to protect the environment, dispose of used oil and used oil filters at designated disposal sites only.

PROCEDURE


  1. DRAIN ENGINE OIL

    Click here

  2. REMOVE FRONT FENDER APRON SEAL RH

    Click here

  3. REMOVE ENGINE OIL TEMPERATURE SENSOR


    1. B007X3N

      Disengage the clamp and remove the connector cover from the stiffening crankcase assembly.

    2. B007XJ8

      Disconnect the engine oil temperature sensor connector.

    3. B007WT4N01

      Using SST, remove the engine oil temperature sensor from the stiffening crankcase assembly.

      SST
      09817-33191

      Note

      If the engine oil temperature sensor has been struck or dropped, replace it.

    4. Remove the gasket from the engine oil temperature sensor.