FA20 ENGINE CONTROL TORQUE SPECIFICATIONS

Part Tightened N*m kgf*cm ft.*lbf
Engine mount assembly x Front suspension cross member 45 459 33
Cylinder head cover sub-assembly x Injector driver 6.4 65 57 in.*lbf
Cylinder head cover sub-assembly x Injector cover 19 194 14
Timing chain or belt cover sub-assembly x Camshaft timing oil control valve (OCV) 6.4 65 57 in.*lbf
Throttle with motor body assembly x Intake manifold 8.0 82 71 in.*lbf
ECM x Body 7.5 76 66 in.*lbf
Accelerator pedal assembly x Body 7.5 76 66 in.*lbf
MASS air flow meter x Air cleaner case sub-assembly 1.0 10 9.0 in.*lbf
VVT sensor x Cylinder block sub-assembly 6.4 65 57 in.*lbf
Crankshaft position sensor x Cylinder block sub-assembly 6.4 65 57 in.*lbf
Spark plug x Cylinder head sub-assembly 17 173 13
Ignition coil x Cylinder head cover sub-assembly 8.5 87 75 in.*lbf

Clutch flexible hose bracket x Body

(for RHD Manual Transmission)

7.5 76 66 in.*lbf
Engine wire x Injector cover 11 112 8
Engine coolant temperature sensor x Cylinder head sub-assembly 18 184 13
Engine oil temperature sensor x Timing chain or belt cover sub-assembly 18 184 13
Knock sensor x Cylinder block sub-assembly 24 245 18
Manifold absolute pressure sensor x Intake manifold 4.0 41 35 in.*lbf

Air fuel ratio sensor x Exhaust manifold

(without SST)

21 214 16

Air fuel ratio sensor x Exhaust manifold

(with SST)

18 184 13

Heated oxygen sensor x Exhaust manifold

(without SST)

21 214 16

Heated oxygen sensor x Exhaust manifold

(with SST)

18 184 13