BRAKE MASTER CYLINDER(w/o ABS) REASSEMBLY

PROCEDURE

1. INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER

   
   

   1. Install the brake master cylinder reservoir strainer to the brake master cylinder reservoir assembly.

2. INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

   
   

   1. Install the brake master cylinder reservoir filler cap assembly to the brake master cylinder reservoir assembly.

3. INSTALL BRAKE FLUID INFORMATION LABEL

4. INSTALL MASTER CYLINDER RESERVOIR GROMMET

   
   

   1. 

      Lithium soap base glycol grease

      Apply a light coat of lithium soap base glycol grease to the entire circumference of 2 new master cylinder reservoir grommets.

   2. Install the 2 master cylinder reservoir grommets to the brake master cylinder body.

5. INSTALL BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY

   
   

   1. Secure the brake master cylinder body in a vise.

      Note

      Place aluminum plates on the vise to prevent damage to the brake master cylinder body.

   2. Install the brake master cylinder reservoir assembly to the brake master cylinder body.

   3. Using a pin punch and hammer, install a pin to the brake master cylinder reservoir assembly.

   4. Remove the brake master cylinder sub-assembly from the vise.