ECD SYSTEM(for DPF), Diagnostic DTC:P0630

DTC Code DTC Name
P0630 VIN not Programmed or Mismatch - ECM / PCM

DESCRIPTION

DTC P0630 is set when the Vehicle Identification Number (VIN) is not stored in the ECM or the input VIN is not accurate. Input the VIN with the intelligent tester.

DTC No. DTC Detection Condition Trouble Area
P0630

VIN not stored in ECM

Input VIN in ECM not accurate

(1 Trip detection logic)

 ECM

PROCEDURE


  1. CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0630)


    1. Connect an intelligent tester to the DLC3.

    2. Turn the ignition switch to ON and turn the tester ON.

    3. Select the following menu items: Powertrain / Engine and ECT / DTC.

    4. Read DTCs.

      Result
      Display (DTC Output) Proceed To
      P0630 A
      P0630 and other DTCs B

      If any DTCs other than P0630 are output, troubleshoot those DTCs first.

      Note

      If P0630 is set, the VIN must be input to the ECM using the intelligent tester. However, all DTCs are cleared automatically by the tester when inputting the VIN. If DTCs other than P0630 are set, check them first.


    B

    GO TO DTC CHART

    A

  2. INPUT VIN WITH INTELLIGENT TESTER


    1. Refer to the REGISTRATION Click here.


    NEXT

    END