HOOD ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT HOOD SUB-ASSEMBLY


    1. Check that the clearance measurements of areas *a through *e are within each standard range.

      A004JIGE01
      Standard Clearance
      Area Measurement Area Measurement
      *a 5.8 to 9.8 mm (0.2283 to 0.3858 in.) *b 3.0 to 7.0 mm (0.1181 to 0.2756 in.)
      *c -2.0 to 2.0 mm (-0.0787 to 0.0787 in.) *d 2.0 to 5.0 mm (0.0787 to 0.1969 in.)
      *e -2.0 to 1.0 mm (-0.0787 to 0.0394 in.) - -