FUEL FILTER INSPECTION


  1. INSPECT LEVEL WARNING SWITCH

    A01DX8GE01

    1. Measure the resistance of the switch.

      Standard resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 ON Below 1 Ω
      1 - 2 OFF 10 kΩ or higher

      If the result is not as specified, replace the fuel filter.

  2. INSPECT CLOGGING SWITCH

    A01DUYYE01

    1. Measure the resistance between the terminals.

      Standard resistance
      Below 1 Ω at 20°C (68°F)

      If the result is not as specified, replace the fuel filter.