CENTER AIRBAG SENSOR ASSEMBLY REMOVAL

PROCEDURE

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note:

    • After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click hereClick hereClick here).

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click hereClick hereClick hereClick here).

  2. REMOVE REAR CONSOLE BOX ASSEMBLY

    1. Remove the console box assembly (Click hereClick here).

  3. REMOVE CENTER AIRBAG SENSOR ASSEMBLY

    1. B238367

      Disconnect the connector.

    2. Remove the 3 bolts and airbag sensor.