CLEARANCE WARNING ECU(for RHD) REMOVAL

PROCEDURE

1. PRECAUTION

   Note

   After turning the engine switch off, waiting time maybe required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

   Click here

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

3. REMOVE DOOR SCUFF PLATE ASSEMBLY RH

   Click here

4. REMOVE COWL SIDE TRIM BOARD RH

   Click here

5. REMOVE REAR CONSOLE ARMREST ASSEMBLY

   Click here

6. REMOVE UPPER REAR CONSOLE PANEL

   Click here

7. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH

   Click here

8. REMOVE INSTRUMENT SIDE PANEL RH

   Click here

9. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

   Click here

10. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

11. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

12. REMOVE ECU INTEGRATION BOX RH

    Click here

13. REMOVE CLEARANCE WARNING ECU ASSEMBLY

    
    

    1. 

       Detach the 2 claws and remove the clearance warning ECU assembly.