METER / GAUGE SYSTEM SYSTEM DESCRIPTION

E267457C01

*A

for Segment Display Type

-

-

*1

Speedometer

*2

Tachometer

*3

Fuel Receiver Gauge

*4

Multi-information Display
E267458C01

*A

for Dot Display Type

-

-

*1

Speedometer

*2

Tachometer

*3

Fuel Receiver Gauge

*4

Multi-information Display

*5

Shift Position Indicator (except Manual Transaxle)

-

-

  1. METER GAUGE AND WARNING/INDICATOR

    Table 1. Meter or Gauge

    Item

    Details

    Speedometer

    Based on a signal received from the wheel speed sensors, the brake actuator assembly (skid control ECU) calculates the vehicle speed and transmits data to the combination meter assembly (CAN).

    Tachometer

    The combination meter assembly receives an engine speed signal from the ECM and the gauge needle operates (CAN).

    Fuel receiver gauge

    The combination meter assembly receives fuel amount information measured by the fuel sender gauge and the gauge needle operates (Direct line).
    Table 2. Warning or Indicator (for Segment Display Type)

    Item

    Details

    Open door warning light

    Receives door open signals from the main body ECU (multiplex network body ECU) (CAN).

    Brake warning light

    • Receives malfunction signals from the brake actuator assembly (skid control ECU) (CAN).

    • Receives parking brake switch on signals from the main body ECU (multiplex network body ECU) (CAN).

    • Brake fluid level warning switch is on (Direct line).

    Front seat belt warning light

    • Receives driver side and passenger side seat belt signals (unfastened) from the airbag sensor assembly (CAN).*15

    • Receives driver side seat belt signals (unfastened) from the main body ECU (multiplex network body ECU) (CAN).*16

    • Receives passenger side seat belt signals (unfastened) from the front seat inner belt assembly and separate type front seat cushion pad (occupant detection sensor) (Direct line).*16

    SRS warning light

    Receives SRS warning light signals from the airbag sensor assembly (CAN).

    Engine coolant temperature warning light

    Receives engine coolant temperature warning light signals from the ECM (CAN).

    Charge warning light

    Receives malfunction signals from the generator assembly (Direct line).

    Engine oil pressure warning light

    Receives malfunction signals from the engine oil pressure switch assembly (Direct line).

    A/T OIL TEMP warning light*1

    Receives A/T OIL TEMP warning light signals from the TCM (CAN).

    EPS warning light

    Receives EPS warning light signals from the power steering ECU assembly (CAN).

    MIL

    Receives malfunction signals from the ECM (Direct line).

    Slip indicator light*2

    Receives slip indicator light signals from the brake actuator assembly (skid control ECU) (CAN).

    VSC OFF indicator light*2

    Receives VSC OFF indicator light signals from the brake actuator assembly (skid control ECU) (CAN).

    TRC OFF indicator light*2*3*16

    TRAC OFF indicator light*15

    Receives TRC OFF indicator light*16 or TRAC OFF indicator light*15 signals from the brake actuator assembly (skid control ECU) (CAN).

    ABS warning light

    Receives ABS warning light signals from the brake actuator assembly (skid control ECU) (CAN).

    Tire pressure warning light*4

    Receives tire pressure warning light signals from the tire pressure warning ECU and receiver (CAN).

    Fuel level warning light

    Receives signals from the fuel sender gauge assembly indicating low or no fuel (Direct line).

    Rear fog indicator light*5

    Receives rear fog light signals from the FOG RR relay (Direct line).

    4WD/AWD warning light*3

    Receives 4WD/AWD warning light signals from the 4WD ECU assembly (CAN).

    4WD/AWD lock indicator light*3

    Receives 4WD/AWD lock indicator light signals from the 4WD ECU assembly (CAN).

    Speed limit indicator light*6

    Receives vehicle speed signals from the brake actuator assembly (skid control ECU) (CAN).

    AUTO LSD indicator light*7

    Receives AUTO LSD indicator light signals from the brake actuator assembly (skid control ECU) (CAN).

    BSM indicator light*8

    Receives BSM indicator light signals from the blind spot monitor sensor (CAN).

    Automatic high beam indicator light*9

    Receives automatic high beam indicator light signals from the main body ECU (multiplex network body ECU) (CAN).

    Downhill assist control indicator light*10

    Receives downhill assist control indicator light signals from the brake actuator assembly (skid control ECU) (CAN).

    Cruise control indicator light*11

    Receives cruise control indicator light signals from the ECM (CAN).

    Entry warning light*12

    Receives entry warning light signals from the certification ECU (smart key ECU assembly) (CAN).

    High beam indicator light

    • Receives high beam headlight signals from the DIMMER relay (Direct line).*16

    • Receives high beam indicator light signals from the main body ECU (multiplex network body ECU) (Direct line).*15

    Front fog indicator light

    Receives front fog light signals from the FOG FR relay (Direct line).

    Turn indicator light

    • Receives hazard answer-back signals from the main body ECU (multiplex network body ECU) (CAN).

    • Turn signal light switch is on (Direct line).

    • Hazard warning signal switch is on (Direct line).

    SPORT indicator light*13

    Receives SPORT indicator light signal from the ECM*1 or 4WD ECU assembly*14 (CAN).

    ECO MODE indicator light*1

    Receives ECO MODE indicator light signal from the TCM (CAN).

    Eco driving indicator light*1

    Receives ecology light indicator signal from the ECM (CAN).

    SET indicator light*11

    Receives SET indicator light signal from the ECM (CAN).

    Washer level indicator light*17

    Receives level warning switch signals from the level warning switch assembly (Direct line).

    • *1: except Manual Transaxle

    • *2: w/ VSC

    • *3: for 4WD/AWD

    • *4: w/ Tire Pressure Warning System

    • *5: w/ Rear Fog Light

    • *6: for Middle East

    • *7: for 2WD, w/ VSC

    • *8: w/ Blind Spot Monitor System

    • *9: w/ Automatic High Beam System

    • *10: w/ Downhill Assist Control

    • *11: w/ Cruise Control System

    • *12: w/ Entry and Start System

    • *13: except Manual Transaxle (for 2WD)

    • *14: for Manual Transaxle (for 4WD/AWD)

    • *15: w/ Panic Switch

    • *16: w/o Panic Switch

    • *17: w/ Washer Level Warning System

    Table 3. Warning or Indicator (for Dot Display Type)

    Item

    Details

    Master warning light

    Receives warning signals from sensors and ECUs (CAN).

    Open door warning light

    Receives door open signals from the main body ECU (multiplex network body ECU) (CAN).

    Brake warning light

    • Receives malfunction signals from the brake actuator assembly (skid control ECU) (CAN).

    • Receives parking brake switch on signals from the main body ECU (multiplex network body ECU) (CAN).

    • Brake fluid level warning switch is on (Direct line).

    Front seat belt warning light

    • Receives driver side seat belt signals (unfastened) from the main body ECU (multiplex network body ECU) (CAN).

    • Receives passenger side seat belt signals (unfastened) from the front seat inner belt assembly and separate type front seat cushion pad (occupant detection sensor) (Direct line).

    SRS warning light

    Receives SRS warning light signals from the airbag sensor assembly (CAN).

    Engine coolant temperature warning light

    Receives engine coolant temperature warning light signals from the ECM (CAN).

    Engine coolant temperature indicator light (cool)

    Receives engine coolant temperature indicator light (cool) signals from the ECM (CAN).

    Charge warning light

    Receives malfunction signals from the generator assembly (Direct line).

    EPS warning light

    Receives EPS warning light signals from the power steering ECU assembly (CAN).

    MIL

    Receives malfunction signals from the ECM (Direct line).

    Slip indicator light*1

    Receives slip indicator light signals from the brake actuator assembly (skid control ECU) (CAN).

    VSC OFF indicator light*1

    Receives VSC OFF indicator light signals from the brake actuator assembly (skid control ECU) (CAN).

    ABS warning light

    Receives ABS warning light signals from the brake actuator assembly (skid control ECU) (CAN).

    Tire pressure warning light*2

    Receives tire pressure warning light signals from the tire pressure warning ECU and receiver (CAN).

    Fuel level warning light

    Receives signals from the fuel sender gauge assembly indicating low or no fuel (Direct line).

    Glow indicator light*3

    Receives glow indicator light signals from the tire ECM (CAN).

    Rear fog indicator light*4

    Receives rear fog indicator light signals from the main body ECU (multiplex network body ECU) (CAN).

    Headlight beam level control system indicator light*5

    Receives headlight beam level control system indicator light signals from the headlight leveling ECU assembly (CAN).

    4WD/AWD lock indicator light*6

    Receives 4WD/AWD lock indicator light signals from the 4WD ECU assembly (CAN).

    Stop and start cancel indicator light*7

    Receives stop and start cancel indicator light signals from the engine stop and start ECU (CAN).

    AUTO LSD indicator light*8

    Receives AUTO LSD indicator light signals from the brake actuator assembly (skid control ECU) (CAN).

    BSM indicator light*9

    Receives BSM indicator light signals from the blind spot monitor sensor (CAN).

    Automatic high beam indicator light*10

    Receives automatic high beam indicator light signals from the main body ECU (multiplex network body ECU) (CAN).

    Lane departure alert indicator light*11

    Receives lane departure alert indicator light signals from the lane departure warning camera (CAN).

    Cruise control indicator light*12

    Receives cruise control indicator light signals from the ECM (CAN).

    High beam indicator light

    Receives high beam headlight signals from the DIMMER relay (Direct line).

    Downhill assist control indicator light*13

    Receives downhill assist control indicator light signals from the brake actuator assembly (skid control ECU) (CAN).

    Front fog indicator light

    Receives front fog indicator light signals from the main body ECU (multiplex network body ECU) (CAN).

    Turn indicator light

    • Receives hazard answer-back signals from the main body ECU (multiplex network body ECU) (CAN).

    • Turn signal light switch is on (Direct line).

    • Hazard warning signal switch is on (Direct line).

    SPORT indicator light*16

    Receives SPORT indicator light signal from the ECM*15 or 4WD ECU assembly*17 (CAN).

    ECO MODE indicator light*14

    Receives ECO MODE indicator light signal from the TCM (CAN).

    Eco driving indicator light*14

    Receives ecology light indicator signal from the ECM (CAN).

    SIL indicator light*15

    Receives SIL indicator light signals from the ECM (CAN).

    SET indicator light*12

    Receives SET indicator light signal from the ECM (CAN).

    Stop and start indicator light*7

    Receives stop and start indicator light signals from the engine stop and start ECU (CAN).

    • *1: w/ VSC

    • *2: w/ Tire Pressure Warning System

    • *3: Engine Type Diesel

    • *4: w/ Rear Fog Light

    • *5: w/ Automatic Headlight Beam Level Control System

    • *6: for 4WD/AWD

    • *7: w/ Stop and Start System

    • *8: for 2WD, w/ VSC

    • *9: w/ Blind Spot Monitor System

    • *10: w/ Automatic High Beam System

    • *11: w/ Lane Departure Alert System

    • *12: w/ Cruise Control System

    • *13: w/ Downhill Assist Control

    • *14: except Manual Transaxle

    • *15: for Manual Transaxle

    • *16: except Manual Transaxle (for 2WD)

    • *17: for Manual Transaxle (for 4WD/AWD)