STOP AND START SYSTEM CANCEL SWITCH ASSEMBLY INSPECTION

PROCEDURE

  1. INSPECT ECO RUN CANCEL SWITCH ASSEMBLY

    1. A322396C01

      *a

      Component without harness connected

      (Eco Run Cancel Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Switch Condition

      Specified Condition

      6 (ECU) - 3 (E)

      Pushed

      Below 1 Ω

      Not pushed

      10 kΩ or higher

      If the result is not as specified, replace the eco run cancel switch assembly.