2AR-FE STARTING SERVICE DATA

Table 1. STARTER ASSEMBLY
Tester Connection	Condition	Specified Condition
Battery positive terminal - Terminal 30	11.5 V	90 A or less

Table 2. MAGNET STARTER SWITCH ASSEMBLY (for 1.6 kW Type)
Tester Connection	Condition	Specified Condition
Terminal 50 - Terminal C	Always	Below 1 Ω
Terminal 50 - Switch body	Always	Below 2 Ω

Table 3. MOTOR TERMINAL STARTER KIT (for 1.7 kW Type)
Tester Connection	Condition	Specified Condition
Terminal 50 - Terminal C	Always	Below 1 Ω
Terminal 50 - Switch body	Always	Below 2 Ω

Table 4. STARTER ARMATURE ASSEMBLY (Standard Resistance)
Tester Connection	Condition	Specified Condition
Segment - Segment	Always	Below 1 Ω
Segment - Coil core	Always	10 kΩ or higher

Table 5. STARTER ARMATURE ASSEMBLY (Commutator length)
Standard length	3.1 mm (0.122 in.)
Maximum length	3.8 mm (0.150 in.)

Table 6. STARTER COMMUTATOR END FRAME ASSEMBLY (Standard Resistance)
Tester Connection	Condition	Specified Condition
Positive (+) brush - Negative (-) brush	Always	10 kΩ or higher

Table 7. STARTER COMMUTATOR END FRAME ASSEMBLY (Brush length)
Standard Length	9.0 mm (0.354 in.)
Minimum Length	4.0 mm (0.157 in.)

Table 8. STARTER RELAY
Tester Connection	Condition	Specified Condition
3 - 5	Battery voltage not applied to terminals 1 and 2	10 kΩ or higher
3 - 5	Battery voltage applied to terminals 1 and 2	Below 1 Ω