PTC HEATER ASSEMBLY INSPECTION

PROCEDURE

  1. INSPECT QUICK HEATER ASSEMBLY

    1. E170870C09

      *a

      Component without harness connected

      (Quick Heater Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      A6-1 (B) - A7-1 (E)

      Always

      Below 1 Ω

      A6-2 (B) - A7-1 (E)

      Always

      Below 1 Ω

      A6-2 (B) - A7-2 (E)

      Always

      Below 1 Ω

      A6-3 (B) - A7-2 (E)

      Always

      Below 1 Ω

      • If the result is not as specified, replace the quick heater assembly.