PRE-CRASH SAFETY SYSTEM


  1. CONSTRUCTION


    1. The combination meter assembly uses the multi-information display, master warning light, PCS warning light and multi buzzer to provide the driver with pre-crash safety system warnings and indications.

      B0020KAC01
      *A Models with Analog Type Combination Meter Assembly with Dot Display Type Multi-information Display *B Models with Optitron Type Combination Meter Assembly
      *1 Combination Meter Assembly - -
      *a PCS Warning Light *b VSC OFF Indicator Light
      *c Multi-information Display *d Master Warning Light

    2. If the forward recognition camera and/or millimeter wave radar sensor assembly determines that the possibility of a collision is high, it sends a signal to the combination meter assembly. Upon receiving this signal, the combination meter assembly indicates a warning using the multi-information display, master warning light, PCS warning light and skid control buzzer assembly. Details are indicated below.

      When there is a high possibility of a collision
      Multi-information Display PCS Warning Light Skid Control Buzzer Assembly
      BRAKE! - Sounds continuously

    3. When the system is not available, the following warning occurs to warn the driver.


      1. Models with Analog Type Combination Meter Assembly with Dot Display Type Multi-information Display

        When a system malfunction is detected (Models without camera heater)
        Condition Multi-information Display Master Warning Light PCS Warning Light Multi Buzzer
        This message appears when the forward recognition camera and/or millimeter wave radar sensor assembly detects a system malfunction. PRE-CRASH SAFETY MALFUNCTION VISIT YOUR DEALER Illuminates Flashes Sounds once

        Millimeter wave radar sensor assembly is temporarily malfunctioning.


        • Millimeter wave radar sensor assembly voltage is abnormal.

        • Millimeter wave radar sensor assembly temperature is outside of operating range.

        • Other malfunction exists in millimeter wave radar sensor assembly.

        		 PRE-CRASH SAFETY UNAVAILABLE - Flashes -

        Forward recognition camera is temporarily malfunctioning.


        • Forward recognition camera voltage is abnormal.

        • Forward recognition camera temperature is outside of operating range.

        		 FORWARD CAMERA SYSTEM UNAVAILABLE - Flashes -
        Dirty center mark of upper radiator grille or millimeter wave radar sensor assembly. PRE-CRASH SAFETY UNAVAILABLE CLEAN SENSOR - Flashes -
        Dirty windshield glass over the forward recognition camera. FORWARD CAMERA SYSTEM UNAVAILABLE CLEAN WINDSHIELD - Flashes -
        When a system malfunction is detected (Models with camera heater)
        Condition Multi-information Display Master Warning Light PCS Warning Light Multi Buzzer
        This message appears when the forward recognition camera and/or millimeter wave radar sensor assembly detects a system malfunction. PRE-CRASH SAFETY MALFUNCTION VISIT YOUR DEALER Illuminates Flashes Sounds once

        Millimeter wave radar sensor assembly is temporarily malfunctioning.


        • Millimeter wave radar sensor assembly voltage is abnormal.

        • Millimeter wave radar sensor assembly temperature is outside of operating range.

        • Other malfunction exists in millimeter wave radar sensor assembly.

        		 PRE-CRASH SAFETY UNAVAILABLE* - Illuminates -

        Forward recognition camera is temporarily malfunctioning.


        • Forward recognition camera voltage is abnormal.

        • Forward recognition camera temperature is outside of operating range.

        		 FORWARD CAMERA SYSTEM UNAVAILABLE* - Illuminates -
        Dirty center mark of upper radiator grille or millimeter wave radar sensor assembly. PRE-CRASH SAFETY UNAVAILABLE CLEAN SENSOR* - Illuminates -
        Dirty windshield glass over the forward recognition camera. FORWARD CAMERA SYSTEM UNAVAILABLE CLEAN WINDSHIELD* - Illuminates -

        Tech Tips

        *: The message appears for 6 seconds on the multi-information display.

        When the pre-crash safety system is turned off
        Condition Multi-information Display Master Warning Light PCS Warning Light Multi Buzzer
        Pre-crash safety system operation is disabled. PRE-CRASH SAFETY OFF* - Illuminates -

        Tech Tips

        *: The message appears for 6 seconds on the multi-information display.

        When in VSC OFF mode
        Condition Multi-information Display Master Warning Light PCS Warning Light VSC OFF Indicator Light
        Pre-crash brake and pre-crash brake assist operation is disabled (a warning that occurs when there is a high possibility of a collision is still enabled). VSC TURNED OFF PRE-CRASH BRAKE SYSTEM UNAVAILABLE* - Illuminates Illuminates

        Tech Tips

        *: The message appears for 6 seconds on the multi-information display.

      2. Models with Optitron Type Combination Meter Assembly

        When a system malfunction is detected (Models without camera heater)
        Condition Multi-information Display Master Warning Light PCS Warning Light Multi Buzzer
        This message appears when the forward recognition camera and/or millimeter wave radar sensor assembly detects a system malfunction. Pre-Crash Safety Malfunction Visit Your Dealer Illuminates Flashes Sounds once

        Millimeter wave radar sensor assembly is temporarily malfunctioning.


        • Millimeter wave radar sensor assembly voltage is abnormal.

        • Millimeter wave radar sensor assembly temperature is outside of operating range.

        • Other malfunction exists in millimeter wave radar sensor assembly.

        		 Pre-Crash Safety Unavailable - Flashes -

        Forward recognition camera is temporarily malfunctioning.


        • Forward recognition camera voltage is abnormal.

        • Forward recognition camera temperature is outside of operating range.

        		 Forward Camera System Unavailable - Flashes -
        Dirty center mark of upper radiator grille or millimeter wave radar sensor assembly. Pre-Crash Safety Unavailable Clean Sensor - Flashes -
        Dirty windshield glass over the forward recognition camera. Forward Camera System Unavailable Clean Windshield - Flashes -
        When a system malfunction is detected (Models with camera heater)
        Condition Multi-information Display Master Warning Light PCS Warning Light Multi Buzzer
        This message appears when the forward recognition camera and/or millimeter wave radar sensor assembly detects a system malfunction. Pre-Crash Safety Malfunction Visit Your Dealer Illuminates Flashes Sounds once

        Millimeter wave radar sensor assembly is temporarily malfunctioning.


        • Millimeter wave radar sensor assembly voltage is abnormal.

        • Millimeter wave radar sensor assembly temperature is outside of operating range.

        • Other malfunction exists in millimeter wave radar sensor assembly.

        		 Pre-Crash Safety Unavailable* - Illuminates -

        Forward recognition camera is temporarily malfunctioning.


        • Forward recognition camera voltage is abnormal.

        • Forward recognition camera temperature is outside of operating range.

        		 Forward Camera System Unavailable* - Illuminates -
        Dirty center mark of upper radiator grille or millimeter wave radar sensor assembly. Pre-Crash Safety Unavailable Clean Sensor* - Illuminates -
        Dirty windshield glass over the forward recognition camera. Forward Camera System Unavailable Clean Windshield* - Illuminates -

        Tech Tips

        *: The message appears for 6 seconds on the multi-information display.

        When the pre-crash safety system is turned off
        Condition Multi-information Display Master Warning Light PCS Warning Light Multi Buzzer
        Pre-crash safety system operation is disabled. Pre-Crash Safety Off* - Illuminates -

        Tech Tips

        *: The message appears for 6 seconds on the multi-information display.

        When in VSC OFF mode
        Condition Multi-information Display Master Warning Light PCS Warning Light VSC OFF Indicator Light
        Pre-crash brake and pre-crash brake assist operation is disabled (a warning that occurs when there is a high possibility of a collision is still enabled). VSC Turned Off Pre-Crash Brake System Unavailable* - Illuminates Illuminates

        Tech Tips

        *: The message appears for 6 seconds on the multi-information display.