POWER SEAT SWITCH INSPECTION


  1. INSPECT FRONT POWER SEAT SWITCH RH (for RHD)


    1. A01DYQ8E03
      Text in Illustration
      *1 Reclining Switch
      *2 Slide Switch
      *3 Rear Lifter Switch
      *4

      Component without harness connected

      (Power Seat Switch RH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Reclining Switch
      Tester Connection Switch Condition Specified Condition
      1 (B) - 3 (RCLF) Front Below 1 Ω
      2 (RCLR) - 4 (E)
      3 (RCLF) - 4 (E) Off
      2 (RCLR) - 4 (E)
      1 (B) - 2 (RCLR) Rear
      3 (RCLF) - 4 (E)
      Slide Switch
      Tester Connection Switch Condition Specified Condition
      1 (B) - 9 (SLDF) Front Below 1 Ω
      6 (SLDR) - 4 (E)
      9 (SLDF) - 4 (E) Off
      6 (SLDR) - 4 (E)
      1 (B) - 6 (SLDR) Rear
      9 (SLDF) - 4 (E)
      Rear Lifter Switch
      Tester Connection Switch Condition Specified Condition
      1 (B) - 8 (LUP) Up Below 1 Ω
      7 (LDWN) - 4 (E)
      8 (LUP) - 4 (E) Off
      7 (LDWN) - 4 (E)
      1 (B) - 7 (LDWN) Down
      8 (LUP) - 4 (E)

      If the result is not as specified, replace the front power seat switch RH.

  2. INSPECT FRONT POWER SEAT SWITCH LH (for LHD)


    1. A01DWFEE01
      Text in Illustration
      *1 Reclining Switch
      *2 Slide Switch
      *3 Rear Lifter Switch
      *a

      Component without harness connected

      (Front Power Seat Switch LH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Reclining Switch
      Tester Connection Switch Condition Specified Condition
      1 (B) - 3 (RCLF) Front Below 1 Ω
      2 (RCLR) - 4 (E)
      3 (RCLF) - 4 (E) Off
      2 (RCLR) - 4 (E)
      1 (B) - 2 (RCLR) Rear
      3 (RCLF) - 4 (E)
      Slide Switch
      Tester Connection Switch Condition Specified Condition
      1 (B) - 9 (SLDF) Front Below 1 Ω
      6 (SLDR) - 4 (E)
      9 (SLDF) - 4 (E) Off
      6 (SLDR) - 4 (E)
      1 (B) - 6 (SLDR) Rear
      9 (SLDF) - 4 (E)
      Rear Lifter Switch
      Tester Connection Switch Condition Specified Condition
      1 (B) - 7 (LUP) Up Below 1 Ω
      8 (LDWN) - 4 (E)
      7 (LUP) - 4 (E) Off
      8 (LDWN) - 4 (E)
      1 (B) - 8 (LDWN) Down
      7 (LUP) - 4 (E)

      If the result is not as specified, replace the front power seat switch LH.