MULTIPLEX TILT AND TELESCOPIC ECU INSTALLATION

PROCEDURE

1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU

   1. Install the ECU with the bolt.

      2.8 N*m

      28 kgf*cm

      24 in.*lbf

   2. Connect the 2 connectors.

      Note:

      The connectors on both ends of the wire harness between the telescopic motor and ECU are the same shape. When installing them, connect the connectors of the same color.

   3. Attach the wire harness clamp.

2. INSTALL NO. 1 INSTRUMENT LOWER PANEL AIRBAG ASSEMBLY

   1. Install the instrument lower panel airbag assembly (Click here).

3. INSPECT SRS WARNING LIGHT

   1. Inspect the SRS warning light (Click hereClick here).