PRE-CRASH SAFETY SYSTEM DTC CHECK / CLEAR

  1. CHECK DTC

    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Enter the following menus: Body / (desired system) / DTC.

    4. Check for DTCs.

      Body Electrical > Pre-Crash > Trouble Codes

      Tip:

      As the driving support ECU and seat belt control ECU output DTCs for the pre-crash safety system, be sure to check the DTCs for Pre-Crash and Pre-Crash 2.

  2. CLEAR DTC

    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Enter the following menus: Body / (desired system) / DTC.

    4. Clear the DTCs.

      Body Electrical > Pre-Crash > Clear DTCs

      Tip:

      As the driving support ECU and seat belt control ECU output DTCs for the pre-crash safety system, be sure to check the DTCs for Pre-Crash and Pre-Crash 2.