VACUUM PUMP(for A25A-FKS) REMOVAL

CAUTION / NOTICE / HINT

Note

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click here

PROCEDURE


  1. DISCONNECT NO. 1 VACUUM HOSE CONNECTOR


    1. B0087GXC01
      *a Retainer
      B00888T Pinch
      B008776 Pull off

      Pinch the retainer of the No. 1 vacuum hose connector, and then pull the No. 1 vacuum hose connector off of the vacuum pump assembly.

      Note

      Be sure to disconnect the No. 1 vacuum hose connector by hand.

  2. SEPARATE ENGINE WIRE


    1. B0083EH

      Disengage the 2 clamps to separate the engine wire.

  3. REMOVE VACUUM PUMP ASSEMBLY


    1. B0089HT

      Using an 8 mm socket wrench, remove the 3 bolts and vacuum pump assembly from the engine assembly.

    2. B0083MF

      Remove the No. 1 vacuum pump O-ring from the vacuum pump assembly.