REAR CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE

  1. REMOVE CONTINUOUSLY VARIABLE TRANSAXLE ASSEMBLY (for CVT)

    Click here

  2. REMOVE CLUTCH DISC ASSEMBLY (for Manual Transaxle)

    Click here

  3. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY (for CVT)

    1. A351484N01

      Using SST, hold the crankshaft pulley.

      09213-70011

      09213-70020

      09330-00021

    2. A351485

      Remove the 8 bolts, the rear drive plate spacer, the drive plate and ring gear sub-assembly and the front drive plate spacer.

  4. REMOVE FLYWHEEL SUB-ASSEMBLY (for Manual Transaxle)

    1. A351484N01

      Using SST, hold the crankshaft pulley.

      09213-70011

      09213-70020

      09330-00021

    2. A357245

      Remove the 8 bolts and flywheel sub-assembly.

  5. REMOVE REAR ENGINE OIL SEAL

    1. A351486C02

      *a

      Cut Position

      *b

      Protective Tape

      Using a knife, cut off the lip of the rear engine oil seal.

    2. Using a screwdriver with its tip wrapped with protective tape, pry out the rear engine oil seal.

      Note:

      Be careful not to damage the crankshaft.