STEERING COLUMN ASSEMBLY REASSEMBLY

CAUTION / NOTICE / HINT

Note


  • Do not drop the steering lock actuator or upper bracket assembly, strike it with tools or subject it toimpacts.

  • If the steering lock actuator or upper bracket assembly is subjected to an impact, replace it with a newone.

PROCEDURE


  1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU


    1. Engage the 2 claws and guide to install the multiplex tilt and telescopic ECU.

  2. INSTALL STEERING LOCK ACTUATOR OR UPPER BRACKET ASSEMBLY

    Note

    If the steering lock actuator or upper bracket assembly is replaced, refer to Service Bulletin.


    1. B005WRM

      Temporarily install the steering lock actuator or upper bracket assembly with 2 new steering lock set bolts.

    2. Tighten the 2 steering lock set bolts until the bolt head breaks off.