FRONT DOOR BELT MOULDING INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. INSTALL FRONT DOOR BELT MOULDING ASSEMBLY LH

    1. Attach the 6 claws to install the front door belt moulding assembly LH.

  2. INSTALL FRONT DOOR GLASS RUN LH

    Click here

  3. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY LH

    Click here

  4. INSTALL FRONT DOOR SERVICE HOLE COVER LH

    Click here

  5. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH

    Click here

  6. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  7. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH

    Click here

  8. INSTALL FRONT DOOR ASSIST GRIP COVER LH

    Click here

  9. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL

    Click here

  10. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH

    Click here

  11. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick hereClick here

  12. CHECK SRS WARNING LIGHT

    Click here

  13. INITIALIZE POWER WINDOW CONTROL SYSTEM

    Click here

  14. CHECK POWER WINDOW CONTROL SYSTEM

    Click here

  15. CHECK POWER DOOR LOCK CONTROL SYSTEM

    Click hereClick here

  16. CHECK OUTER REAR VIEW MIRROR

    Click here

  17. INSTALL BATTERY SERVICE COVER

    Click here

  18. INSTALL DECK BOARD ASSEMBLY

    Click here