TOYOTA PARKING ASSIST-SENSOR SYSTEM(for 8 Sensor Type) CUSTOMIZE PARAMETERS
CUSTOMIZE TOYOTA PARKING ASSIST-SENSOR SYSTEM
Tip:The following items can be customized.
Note:When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the GTS
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the clearance sonar main switch on.
Turn the GTS on.
Enter the following menus: Body Electrical / Clearance Sonar / Utility / Customize.
Select the setting by referring to the table below.
Table 1. Warning Display
Default
Content
Setting
Relevant ECU
Fr Sensor Onset Range
Wide
Sets the detection operation range for the front center sensors.
Narrow or Wide
Clearance warning ECU assembly
Rr Sensor Onset Range
Wide
Sets the detection operation range for the rear center sensors.
Narrow or Wide
Clearance warning ECU assembly
Keep Sense Buzzer
Avail
Sounds the buzzer when the distance between the vehicle and obstacle does not change for more than 3 seconds.
Not Avail or Avail
Not Avail: Not Available
Avail: Available
Clearance warning ECU assembly
Fr & Rr Buzzer Volume
M2
Changes the buzzer volume setting.
L, M1, M2, M3 or H
L: Low volume
M1: Medium low volume
M2: Medium volume
M3: Medium high volume
H: High volume
Clearance warning ECU assembly
Temporary Mute Reset Speed Adjust
20 km/h
Sets the vehicle speed at which the temporary mute function resets.
00: System Link, 01: 15 km/h, 10: 20 km/h, 11: 30 km/h
Clearance warning ECU assembly
Temporary Mute Function
ON
Sets the availability of the temporary mute function.
0: OFF,1: ON
Clearance warning ECU assembly
Table 2. Sensor Display
Default
Content
Setting
Relevant ECU
Sensor Condition N
Avail
Makes the front sensors available when the shift lever is in N.
Not Avail or Avail
Not Avail: Not Available
Avail: Available
Clearance warning ECU assembly
Reverse Range Front Sensor
Fcrn
Changes the operation setting for the front sensors when the shift lever is in R.
F, Fcrn or F Stop
F: All front sensors are available
Fcrn: Front corner sensors are available
F Stop: All Front sensors are not available
Clearance warning ECU assembly
Non P/R Range Rear Sensor
R Stop
Changes the operation setting for the rear sensors when the shift lever is in any position other than P or R.
R, Rcrn or R Stop
R: All rear sensors are available
Rcrn: Rear corner sensors are available
R Stop: All rear sensors are not available
Clearance warning ECU assembly
Table 3. Display Display
Default
Content
Setting
Relevant ECU
Display Mode
All
The display mode setting (when the TOYOTA parking assist-sensor system is normal).
All or Undisp
Clearance warning ECU assembly
Customizing with Multi-display
Turn the ignition switch to ON.
Turn the clearance sonar main switch on.
Enter the following menus: MENU / Setup / Vehicle / TOYOTA Park Assist Settings.
Select the setting by referring to the table below.
Tester Display
Description
Default
Setting
ECU
Alert volume
Sets the buzzer alert volume.
3
1, 2, 3, 4 or 5
Clearance warning ECU assembly
Display
The display mode setting (when the TOYOTA parking assist-sensor system isnormal).
Indicator of Display Off not illuminated*1
Indicator of Display Off not illuminated*1 or indicator of Display Off illuminated*2
Clearance warning ECU assembly
Distance Front
Sets the detection operation range for the front center sensors.
Green*3
Orange*3 or Green*4
Clearance warning ECU assembly
Distance Rear
Sets the detection operation range for the rear center sensors.
Green*5
Orange*5 or Green*6
Clearance warning ECU assembly
*1: Sonar indication is available on the multi-display
*2: Sonar indication is not available on the multi-display
*3: Detection range of 600 mm (23.6 in.)
*4: Detection range of 1500 mm (59.1 in.)
*5: Detection range of 500 mm (19.7 in.)
*4: Detection range of 1000 mm (39.4 in.)