PARKING BRAKE SWITCH(for RHD) INSPECTION

PROCEDURE


  1. INSPECT PARKING BRAKE SWITCH ASSEMBLY


    1. A01OBZSC01
      *a Terminal
      *b Nut
      *c ON
      *d OFF

      Measure the resistance between the connector terminal and the nut inside the parking brake switch assembly.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      Terminal - Nut On (switch not pressed) Below 1 Ω
      Terminal - Nut Off (switch pressed) 10 kΩ or higher

      If the result is not as specified, replace the parking brake switch assembly.