MASS AIR FLOW METER INSTALLATION

PROCEDURE

1. INSTALL MASS AIR FLOW METER

   1. Install the mass air flow meter with the 2 screws.

      Note:

      • If reusing the mass air flow meter, be sure to inspect the O-ring.

      • If a component has been dropped or subjected to a strong impact, replace it.

      • Make sure that the O-ring is not damaged or does not jump out of position during installation.

      Tip:

      Perform "Inspection After Repairs" after replacing the mass air flow meter (Click here).

   2. Connect the connector of the mass air flow meter.