REAR DOOR OUTSIDE MOULDING REASSEMBLY

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL NO. 2 MOULDING TAPE

   
   

   1. When using a new rear door rear upper outside moulding LH:

      
      

      1. Clean the surface of a new rear door rear upper outside moulding LH.

   2. When reusing the rear door rear upper outside moulding LH:

      
      

      1. Remove the double-sided tape from the rear door rear upper outside moulding LH.

      2. Wipe off any tape adhesive residue with cleaner.

   3. Install a new No. 2 moulding tape.

      
      

      1. Remove the peeling paper from the face of the No. 2 moulding tape.

         Tech Tips

         After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      2. 

         Install the No. 2 moulding tape as shown in the illustration.

2. INSTALL REAR DOOR REAR OUTSIDE MOULDING PAD

   
   

   1. When using a new rear door rear upper outside moulding LH:

      
      

      1. Clean the surface of a new rear door rear upper outside moulding LH.

   2. When reusing the rear door rear upper outside moulding LH:

      
      

      1. Remove the double-sided tape from the rear door rear upper outside moulding LH.

      2. Wipe off any tape adhesive residue with cleaner.

   3. Install a new rear door rear outside moulding pad.

      
      

      1. Remove the peeling paper from the face of the rear door rear outside moulding pad.

         Tech Tips

         After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      2. 

         *1	Mark-off Line
         *a	1.0 mm (0.0394 in.)
         *b	3.0 mm (0.118 in.)

         Install the rear door rear outside moulding pad as shown in the illustration.

3. INSTALL REAR DOOR NO. 1 MOULDING PAD

   
   

   1. When using a new rear door rear upper outside moulding LH:

      
      

      1. Clean the surface of a new rear door rear upper outside moulding LH.

   2. When reusing the rear door rear upper outside moulding LH:

      
      

      1. Remove the double-sided tape from the rear door rear upper outside moulding LH.

      2. Wipe off any tape adhesive residue with cleaner.

   3. Install a new rear door No. 1 moulding pad.

      
      

      1. Remove the peeling paper from the face of the rear door No. 1 moulding pad.

         Tech Tips

         After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      2. 

         *1	Mark-off Line
         *a	3.0 mm (0.118 in.)
         *b	1.0 mm (0.0394 in.)

         Install the rear door No. 1 moulding pad as shown in the illustration.

4. INSTALL REAR DOOR UPPER OUTSIDE MOULDING PAD

   
   

   1. When using a new rear door lower outside moulding sub-assembly LH:

      
      

      1. Clean the surface of a new rear door lower outside moulding sub-assembly LH.

   2. When reusing the rear door lower outside moulding sub-assembly LH:

      
      

      1. Remove the double-sided tape from the front door outside moulding.

      2. Wipe off any tape adhesive residue with cleaner.

   3. Install a new rear door upper outside moulding pad.

      
      

      1. Remove the peeling paper from the face of the rear door upper outside moulding pad.

         Tech Tips

         After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      2. 

         *1	Mark-off Line
         *a	3.0 mm (0.118 in.)
         *b	1.0 mm (0.0394 in.)

         Install the rear door upper outside moulding pad as shown in the illustration.