REAR DOOR COURTESY SWITCH(for Hatchback) INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE

  1. INSTALL REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY

    1. Using a T30 "TORX" socket wrench, install the rear door courtesy light switch assembly with the screw.

      6.3 N*m

      64 kgf*cm

      56 in.*lbf

      Tip:

      There are 2 diameters for the "TORX" screws: 6 mm (0.236 in.) and 7 mm (0.276 in.). The diameter of a supplied "TORX" screw is 7 mm (0.276 in.).

    2. Connect the connector.

  2. INSTALL REAR SEAT SIDE GARNISH

    Click hereClick here

  3. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY

    Click hereClick here

  4. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP

    for LH Side:Click hereClick here

    for RH Side:Click hereClick here

  5. INSTALL REAR DOOR SCUFF PLATE

    Click hereClick here

  6. INSTALL REAR SEATBACK ASSEMBLY LH (for LH Side)

    Click here

  7. INSTALL REAR SEATBACK ASSEMBLY RH (for RH Side)

    Click here

  8. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH

    Click here

  9. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY (w/ Center Headrest)

  10. INSTALL REAR SEAT HEADREST ASSEMBLY

  11. INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here

  12. INSTALL DECK FLOOR BOX RH (w/ Deck Floor Box)

    for RH Side:Click hereClick here

  13. INSTALL DECK FLOOR BOX LH (w/ Deck Floor Box)

    Click hereClick here

  14. INSTALL REAR DECK FLOOR BOX (w/ Deck Floor Box)

    Click hereClick here

  15. INSTALL REAR FLOOR MAT ASSEMBLY

    Click hereClick here

  16. INSTALL DECK BOARD ASSEMBLY (w/ Deck Board)

    Click hereClick here