FRONT CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE

  1. REMOVE FRONT WHEEL RH

  2. REMOVE NO. 1 ENGINE UNDER COVER

    Click hereClick hereClick hereClick here

  3. REMOVE REAR ENGINE UNDER COVER RH

    Click hereClick hereClick hereClick here

  4. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH

    Click here

  5. REMOVE V-RIBBED BELT

    Click here

  6. REMOVE CRANKSHAFT PULLEY

    1. A351713C02

      *a

      Hold

      *b

      Turn

      Using SST, hold the crankshaft pulley and loosen the crankshaft pulley set bolt. Further loosen the crankshaft pulley set bolt until 2 or 3 threads remain screwed into the crankshaft.

      09213-70011

      09213-70020

      09330-00021

    2. A351714C02

      *1

      Crankshaft Pulley Set Bolt

      *a

      Hold

      *b

      Turn

      Using SST and the crankshaft pulley set bolt, remove the crankshaft pulley and crankshaft pulley set bolt.

      09950-50013

      09951-05010

      09952-05010

      09953-05020

      09954-05021

      Note:

      Apply lubricant to the threads and end of SST.

  7. REMOVE TIMING CHAIN COVER OIL SEAL

    1. A351481C02

      *a

      Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, pry out the timing chain cover oil seal.

      Note:

      After removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.