WASHER MOTOR(for Front Side) REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL RH

  2. REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side Click here.

  3. REMOVE FRONT FENDER LINER RH


    1. A005D65E02
      Text in Illustration
      *a 90°

      Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

    2. A005EHXE03
      Text in Illustration
      *1 Grommet

      Remove the 9 clips and 3 screws.

    3. Using a clip remover, remove the 2 grommets and front fender liner RH.

      Tech Tips

      The grommet needs to be replaced with a new one because it will break when it is removed.

  4. DRAIN WASHER FLUID


    1. A005ETJ

      Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

      Tech Tips

      Use a container to collect the washer fluid.

  5. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A005BEL

      Disconnect the connector.

    2. Remove the windshield washer motor and pump assembly.