REAR CENTER SEAT OUTER BELT ASSEMBLY(for 60/40 Split Slide Walk-in Seat Type LH Side) REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE REAR NO. 1 SEAT ASSEMBLY LH

   1. Remove the rear No. 1 seat assembly LH (Click here).

2. REMOVE REAR SEAT UPPER RECLINING COVER LH

   Click here

3. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH

   Click here

4. REMOVE CENTER SEAT HINGE COVER RH

   Click here

5. REMOVE REAR SEAT CUSHION MOULDING LH

   Click here

6. REMOVE REAR SEATBACK LOCK STRIKER COVER LH

   Click here

7. REMOVE SEAT CUSHION COVER WITH PAD

   Click here

8. REMOVE CENTER SEATBACK ASSEMBLY

   Click here

9. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY LH

   1. 

      Remove the bolt and inner belt and disconnect the 3 point type belt anchor.

10. REMOVE RECLINING ADJUSTER KNOB CAP LH

    Click here

11. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH

    Click here

12. REMOVE SEAT BELT ANCHOR COVER CAP

    Click here

13. REMOVE REAR SEAT SHOULDER BELT COVER

    Click here

14. REMOVE REAR SEATBACK COVER

    Click here

15. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY LH

    Click here

16. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

    Click here

17. REMOVE SEATBACK COVER WITH PAD

    Click here

18. REMOVE REAR SEAT SHOULDER BELT GUIDE

    Click here

19. REMOVE REAR SEATBACK EDGE PROTECTOR

    Click here

20. REMOVE NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH

    

    1. Remove the nut and bolt, and then detach the 2 claws and remove the seat belt.