1ND-TV LUBRICATION SERVICE DATA

Table 1. Oil Pressure
Condition	Specified Condition
Idling	24.5 kPa (0.25 kgf/cm², 3.6 psi) or higher
Engine running at 3200 rpm	150 kPa (1.5 kgf/cm², 22 psi) or higher

Table 2. Oil Pressure Switching Valve
Tester Condition	Condition	Specified Condition
1 - 2	20°C (68°F)	13 to 17 Ω

Table 3. Standard Oil Grade
Oil Grade	Oil Viscosity (SAE)
ACEA C2	0W-30 5W-30

Table 4. Standard Capacity
Item	Specified Condition
Drain and refill with oil filter change	3.9 liters (4.1 US qts, 3.4 Imp. qts)
Drain and refill without oil filter change	3.5 liters (3.7 US qts, 3.1 Imp. qts)
Dry fill	4.5 liters (4.8 US qts, 4.0 Imp. qts)

Table 5. Engine Oil Level Sensor (Upper Level Switch Resistance)
Tester Condition	Condition	Specified Condition
2 (E) - 3 (OILH)	Level switch on	Below 500 mΩ
2 (E) - 3 (OILH)	Level switch off	1 MΩ or higher

Table 6. Engine Oil Level Sensor (Lower Level Switch Resistance)
Tester Condition	Condition	Specified Condition
1 (LVL) - 2 (E)	Level switch on	Below 500 mΩ
1 (LVL) - 2 (E)	Level switch off	1 MΩ or higher

Table 7. Oil Pump
Item	Condition	Specified Condition
Oil pump rotor	Standard tip clearance	0.08 to 0.16 mm (0.00315 to 0.00630 in.)
	Maximum tip clearance	0.21 mm (0.00827 in.)
	Standard body clearance	0.10 to 0.18 mm (0.00394 to 0.00709 in.)
	Maximum body clearance	0.20 mm (0.00787 in.)
	Standard side clearance	0.03 to 0.09 mm (0.00118 to 0.00354 in.)
	Maximum side clearance	0.15 mm (0.00591 in.)