REAR SEATBACK HEATER(for 60/40 Split Seat Type RH Side) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seat frame may injure your hands.

PROCEDURE


  1. INSTALL REAR SEATBACK HEATER (SEPARATE TYPE REAR SEATBACK COVER)

    Tech Tips

    When installing a rear seatback heater (separate type rear seatback cover), refer to Precaution in order to prevent wrinkles from forming.

    Click here


    1. B005N84N01

      for Manual Seat:


      1. Using hog ring pliers, install the rear seatback heater (separate type rear seatback cover) to the separate type rear seatback pad with 11 new hog rings in the order shown in the illustration.

        Note


        • Be careful not to damage the rear seatback heater (separate type rear seatback cover).

        • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the rear seatback heater (separate type rear seatback cover).

    2. for Power Seat:


      1. B005N84N01

        Using hog ring pliers, install the rear seatback heater (separate type rear seatback cover) to the separate type rear seatback pad with 11 new hog rings in the order shown in the illustration.

        Note


        • Be careful not to damage the rear seatback heater (separate type rear seatback cover).

        • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the rear seatback heater (separate type rear seatback cover).

      2. B005Q1S

        Using hog ring pliers, install a new hog ring.

        Note


        • Be careful not to damage the rear seatback heater (separate type rear seatback cover).

        • Be sure to securely install the hog ring as shown in the illustration while preventing wrinkles from forming on the rear seatback heater (separate type rear seatback cover).

  2. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD

    Click here

  3. INSTALL REAR SEAT SHOULDER BELT COVER

    Click here

  4. INSTALL SEAT BELT ANCHOR COVER CAP

    Click here

  5. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY

    Click here

  6. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY RH

    Click here

  7. INSTALL REAR SEATBACK COVER RH

    Click here

  8. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD

    Click here

  9. CONNECT SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD

    Click here

  10. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE RH (for Manual Seat)

    Click here

  11. INSTALL REAR SEAT COVER CAP RH (for Manual Seat)

    Click here

  12. INSTALL POWER SEAT SWITCH ASSEMBLY (for Power Seat)

    Click here

  13. INSTALL REAR SEAT ASSEMBLY RH

    Click here