CLUTCH MASTER CYLINDER(w/ Turn Over) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. DRAIN CLUTCH FLUID

    Note

    Wash off clutch fluid immediately if it comes into contact with a painted surface.

  2. DISCONNECT INTELLIGENT MANUAL TRANSMISSION CONNECTOR (w/ Intelligent Manual Transmission)


    1. A01SDFT

      Disconnect the intelligent manual transmission connector from the clutch master cylinder assembly.

  3. DISCONNECT CLUTCH RESERVOIR TUBE


    1. A01SCTTC01
      *A w/o Intelligent Manual Transmission
      *B w/ Intelligent Manual Transmission

      Slide the clip and disconnect the clutch reservoir tube from the clutch master cylinder assembly.

      Tech Tips

      Use a container to collect the fluid.

  4. DISCONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE


    1. A01SC44C01
      *A w/o Intelligent Manual Transmission
      *B w/ Intelligent Manual Transmission

      Using a union nut wrench, disconnect the clutch master cylinder to flexible hose tube from the clutch master cylinder assembly.

      Tech Tips

      Use a container to collect the fluid.

  5. DISCONNECT CLUTCH MASTER CYLINDER PUSH ROD CLEVIS

    Click here

  6. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY


    1. A01SACY

      w/o Master Cylinder Bracket:


      1. Remove the 2 nuts, clutch master cylinder assembly and gasket.

    2. w/ Master Cylinder Bracket:


      1. Remove the 2 nuts, clutch master cylinder assembly, master cylinder bracket and 2 gaskets.