DIFFERENTIAL OIL SEAL(for LH Side) REPLACEMENT

PROCEDURE

  1. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH

    Click hereClick hereClick here

  2. REMOVE TRANSAXLE CASE OIL SEAL LH

    C201712N02

    1. Using SST, tap out the transaxle case oil seal LH.

      09308-00010

  3. INSTALL TRANSAXLE CASE OIL SEAL LH

    1. Coat the lip of the transaxle case oil seal LH with MP grease.

    2. C201714N02

      Using SST and a hammer, tap in a new transaxle case oil seal LH.

      09316-10010

      09950-70010

      09951-07100

      Oil seal driven in depth

      -0.5 to 0.5 mm (-0.0197 to 0.0196 in.)

      Note:

      Check that the transaxle case oil seal LH is installed in the correct direction.

  4. INSTALL FRONT DRIVE SHAFT ASSEMBLY LH

    Click hereClick hereClick here