SFI SYSTEM(w/ Canister Pump Module), Diagnostic DTC:P11EA00, P11EB00, P11EC00, P11ED00, P11EE00, P11EF00, P11F000, P11F100, P219A00, P219B00, P219C00, P219D00, P219E00, P219F00, P21A000, P21A100

DTC Code DTC Name
P11EA00 Bank 1 Air-Fuel Ratio Imbalance (Port)
P11EB00 Bank 2 Air-Fuel Ratio Imbalance (Port)
P11EC00 Cylinder #1 Air-Fuel Ratio Imbalance (Port)
P11ED00 Cylinder #2 Air-Fuel Ratio Imbalance (Port)
P11EE00 Cylinder #3 Air-Fuel Ratio Imbalance (Port)
P11EF00 Cylinder #4 Air-Fuel Ratio Imbalance (Port)
P11F000 Cylinder #5 Air-Fuel Ratio Imbalance (Port)
P11F100 Cylinder #6 Air-Fuel Ratio Imbalance (Port)
P219A00 Bank 1 Air-Fuel Ratio Imbalance
P219B00 Bank 2 Air-Fuel Ratio Imbalance
P219C00 Cylinder 1 Air-Fuel Ratio Imbalance
P219D00 Cylinder 2 Air-Fuel Ratio Imbalance
P219E00 Cylinder 3 Air-Fuel Ratio Imbalance
P219F00 Cylinder 4 Air-Fuel Ratio Imbalance
P21A000 Cylinder 5 Air-Fuel Ratio Imbalance
P21A100 Cylinder 6 Air-Fuel Ratio Imbalance

DESCRIPTION

Refer to DTC P003012.

Click here

Refer to DTC P030000.

Click here

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note
P11EA00 Bank 1 Air-Fuel Ratio Imbalance (Port) The difference in air fuel ratios between the cylinders exceeds the threshold (2 trip detection logic).

  • Port fuel injector assembly

  • Direct fuel injector assembly

  • Intake system

  • Gas leaks from exhaust system

  • Ignition system

  • Compression pressure

  • Air fuel ratio sensor (bank 1 sensor 1)

  • ECM

 Comes on DTC stored SAE: P11EA
P11EB00 Bank 2 Air-Fuel Ratio Imbalance (Port) The difference in air fuel ratios between the cylinders exceeds the threshold (2 trip detection logic).

  • Port fuel injector assembly

  • Direct fuel injector assembly

  • Intake system

  • Gas leaks from exhaust system

  • Ignition system

  • Compression pressure

  • Air fuel ratio sensor (bank 2 sensor 1)

  • ECM

 Comes on DTC stored SAE: P11EB
P11EC00 Cylinder #1 Air-Fuel Ratio Imbalance (Port) The difference in air fuel ratios between the cylinders exceeds the threshold (2 trip detection logic).

  • Port fuel injector assembly

  • Direct fuel injector assembly

  • Intake system

  • Gas leaks from exhaust system

  • Ignition system

  • Compression pressure

  • Air fuel ratio sensor (bank 1 sensor 1)

  • ECM

 Comes on DTC stored SAE: P11EC
P11ED00 Cylinder #2 Air-Fuel Ratio Imbalance (Port) The difference in air fuel ratios between the cylinders exceeds the threshold (2 trip detection logic).

  • Port fuel injector assembly

  • Direct fuel injector assembly

  • Intake system

  • Gas leaks from exhaust system

  • Ignition system

  • Compression pressure

  • Air fuel ratio sensor (bank 2 sensor 1)

  • ECM

 Comes on DTC stored SAE: P11ED
P11EE00 Cylinder #3 Air-Fuel Ratio Imbalance (Port) The difference in air fuel ratios between the cylinders exceeds the threshold (2 trip detection logic).

  • Port fuel injector assembly

  • Direct fuel injector assembly

  • Intake system

  • Gas leaks from exhaust system

  • Ignition system

  • Compression pressure

  • Air fuel ratio sensor (bank 1 sensor 1)

  • ECM

 Comes on DTC stored SAE: P11EE
P11EF00 Cylinder #4 Air-Fuel Ratio Imbalance (Port) The difference in air fuel ratios between the cylinders exceeds the threshold (2 trip detection logic).

  • Port fuel injector assembly

  • Direct fuel injector assembly

  • Intake system

  • Gas leaks from exhaust system

  • Ignition system

  • Compression pressure

  • Air fuel ratio sensor (bank 2 sensor 1)

  • ECM

 Comes on DTC stored SAE: P11EF
P11F000 Cylinder #5 Air-Fuel Ratio Imbalance (Port) The difference in air fuel ratios between the cylinders exceeds the threshold (2 trip detection logic).

  • Port fuel injector assembly

  • Direct fuel injector assembly

  • Intake system

  • Gas leaks from exhaust system

  • Ignition system

  • Compression pressure

  • Air fuel ratio sensor (bank 1 sensor 1)

  • ECM

 Comes on DTC stored SAE: P11F0
P11F100 Cylinder #6 Air-Fuel Ratio Imbalance (Port) The difference in air fuel ratios between the cylinders exceeds the threshold (2 trip detection logic).

  • Port fuel injector assembly

  • Direct fuel injector assembly

  • Intake system

  • Gas leaks from exhaust system

  • Ignition system

  • Compression pressure

  • Air fuel ratio sensor (bank 2 sensor 1)

  • ECM

 Comes on DTC stored SAE: P11F1
P219A00 Bank 1 Air-Fuel Ratio Imbalance The difference in air fuel ratios between the cylinders exceeds the threshold (2 trip detection logic).

  • Port fuel injector assembly

  • Direct fuel injector assembly

  • Intake system

  • Gas leaks from exhaust system

  • Ignition system

  • Compression pressure

  • Air fuel ratio sensor (bank 1 sensor 1)

  • ECM

 Comes on DTC stored SAE: P219A
P219B00 Bank 2 Air-Fuel Ratio Imbalance The difference in air fuel ratios between the cylinders exceeds the threshold (2 trip detection logic).

  • Port fuel injector assembly

  • Direct fuel injector assembly

  • Intake system

  • Gas leaks from exhaust system

  • Ignition system

  • Compression pressure

  • Air fuel ratio sensor (bank 2 sensor 1)

  • ECM

 Comes on DTC stored SAE: P219B
P219C00 Cylinder 1 Air-Fuel Ratio Imbalance The difference in air fuel ratios between the cylinders exceeds the threshold (2 trip detection logic).

  • Port fuel injector assembly

  • Direct fuel injector assembly

  • Intake system

  • Gas leaks from exhaust system

  • Ignition system

  • Compression pressure

  • Air fuel ratio sensor (bank 1 sensor 1)

  • ECM

 Comes on DTC stored SAE: P219C
P219D00 Cylinder 2 Air-Fuel Ratio Imbalance The difference in air fuel ratios between the cylinders exceeds the threshold (2 trip detection logic).

  • Port fuel injector assembly

  • Direct fuel injector assembly

  • Intake system

  • Gas leaks from exhaust system

  • Ignition system

  • Compression pressure

  • Air fuel ratio sensor (bank 2 sensor 1)

  • ECM

 Comes on DTC stored SAE: P219D
P219E00 Cylinder 3 Air-Fuel Ratio Imbalance The difference in air fuel ratios between the cylinders exceeds the threshold (2 trip detection logic).

  • Port fuel injector assembly

  • Direct fuel injector assembly

  • Intake system

  • Gas leaks from exhaust system

  • Ignition system

  • Compression pressure

  • Air fuel ratio sensor (bank 1 sensor 1)

  • ECM

 Comes on DTC stored SAE: P219E
P219F00 Cylinder 4 Air-Fuel Ratio Imbalance The difference in air fuel ratios between the cylinders exceeds the threshold (2 trip detection logic).

  • Port fuel injector assembly

  • Direct fuel injector assembly

  • Intake system

  • Gas leaks from exhaust system

  • Ignition system

  • Compression pressure

  • Air fuel ratio sensor (bank 2 sensor 1)

  • ECM

 Comes on DTC stored SAE: P219F
P21A000 Cylinder 5 Air-Fuel Ratio Imbalance The difference in air fuel ratios between the cylinders exceeds the threshold (2 trip detection logic).

  • Port fuel injector assembly

  • Direct fuel injector assembly

  • Intake system

  • Gas leaks from exhaust system

  • Ignition system

  • Compression pressure

  • Air fuel ratio sensor (bank 1 sensor 1)

  • ECM

 Comes on DTC stored SAE: P21A0
P21A100 Cylinder 6 Air-Fuel Ratio Imbalance The difference in air fuel ratios between the cylinders exceeds the threshold (2 trip detection logic).

  • Port fuel injector assembly

  • Direct fuel injector assembly

  • Intake system

  • Gas leaks from exhaust system

  • Ignition system

  • Compression pressure

  • Air fuel ratio sensor (bank 2 sensor 1)

  • ECM

 Comes on DTC stored SAE: P21A1

MONITOR DESCRIPTION




MONITOR STRATEGY

Required Sensors/Components (Main)

Air fuel ratio sensor (sensor 1)

Crankshaft position sensor
Required Sensors/Components (Related)

Mass air flow meter sub-assembly

Engine coolant temperature sensor

Vehicle speed sensor
Frequency of Operation Once per driving cycle

TYPICAL ENABLING CONDITIONS

P11EA, P11EB, P219A and P219B: Air Fuel Ratio Sensor (Sensor 1) Monitoring Method
Air fuel ratio sensor (sensor 1) status Activated
Engine speed 1200 rpm or higher, and less than 2400 rpm
Engine coolant temperature 75°C (167°F) or higher
Atmospheric pressure 76 kPa(abs) [11 psi(abs)] or higher
Fuel system status Closed loop
Engine load 45% or higher, and less than 70%
P11EC, P11ED, P11EE, P11EF, P11F0, P11F1, P219C, P219D, P219E, P219F, P21A0 and P21A1: Crankshaft Position Sensor Monitoring Method
Vehicle speed Less than 3 km/h (1.875 mph)
Engine speed 430 rpm or higher, and less than 1000 rpm
Engine coolant temperature 75°C (167°F) or higher
Air fuel ratio sensor (sensor 1) status Activated
Fuel system status Closed loop
Battery voltage 11 V or higher

TYPICAL MALFUNCTION THRESHOLDS

P11EA and P11EB: Air Fuel Ratio Sensor (Sensor 1) Monitoring Method
Air fuel ratio sensor (sensor 1) monitoring method criteria (rich side imbalance for port injection) 1 or more
P11EC, P11ED, P11EE, P11EF, P11F0 and P11F1: Crankshaft Position Sensor Monitoring Method
Crankshaft position sensor monitoring method criteria (lean side imbalance for port injection) 1 or more
P219A and P219B: Air Fuel Ratio Sensor (Sensor 1) Monitoring Method
Air fuel ratio sensor (sensor 1) monitoring method criteria (rich side imbalance for direct injection) 1 or more
P219C, P219D, P219E, P219F, P21A0 and P21A1: Crankshaft Position Sensor Monitoring Method
Crankshaft position sensor monitoring method criteria (lean side imbalance for direct injection) 1 or more

CONFIRMATION DRIVING PATTERN

B006CV6E05

  1. Connect the GTS to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the GTS on.

  4. Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).

  5. Start the engine and warm it up until the engine coolant temperature reaches 75°C (167°F) or higher [A].

  6. Drive the vehicle at 60 km/h (37 mph) or more for 2 minutes or more [B].

    CAUTION:

    When performing the confirmation driving pattern, obey all speed limits and traffic laws.

    Tech Tips

    It is acceptable to turn electrical loads on while driving.

  7. Idle the engine for 2 minutes or more [C].

  8. Enter the following menus: Powertrain / Engine / Trouble Codes [D].

  9. Read the pending DTCs.

    Tech Tips


    • If a pending DTC is output, the system is malfunctioning.

    • If a pending DTC is not output, perform the following procedure.

  10. Drive the vehicle at less than 30 km/h (19 mph) for 5 seconds or more [E].

    CAUTION:

    When performing the confirmation driving pattern, obey all speed limits and traffic laws.

  11. Accelerate the vehicle from 30 to 60 km/h (19 to 37 mph) over a period of approximately 10 to 20 seconds.

    CAUTION:

    When performing the confirmation driving pattern, obey all speed limits and traffic laws.

    Tech Tips

    Refer to the values of engine load and engine speed in Typical Enabling Conditions before accelerating the vehicle from 30 to 60 km/h (19 to 37 mph).

  12. Drive the vehicle at 60 km/h (37 mph) or more for 5 seconds or more [F].

    CAUTION:

    When performing the confirmation driving pattern, obey all speed limits and traffic laws.

  13. Drive the vehicle at less than 30 km/h (19 mph) for 5 seconds or more [G].

    CAUTION:

    When performing the confirmation driving pattern, obey all speed limits and traffic laws.

  14. Accelerate the vehicle from 30 to 60 km/h (19 to 37 mph) over a period of approximately 10 to 20 seconds.

    CAUTION:

    When performing the confirmation driving pattern, obey all speed limits and traffic laws.

    Tech Tips

    Refer to the values of engine load and engine speed in Typical Enabling Conditions before accelerating the vehicle from 30 to 60 km/h (19 to 37 mph).

  15. Drive the vehicle at 60 km/h (37 mph) or more for 5 seconds or more [H].

    CAUTION:

    When performing the confirmation driving pattern, obey all speed limits and traffic laws.

  16. Repeat steps [G] through [H] above at least 2 times [I].

  17. Idle the engine for 1 minute or more [J].

  18. Enter the following menus: Powertrain / Engine / Trouble Codes [K].

  19. Read the pending DTCs.

    Tech Tips


    • If a pending DTC is output, the system is malfunctioning.

    • If a pending DTC is not output, perform the following procedure.

  20. Enter the following menus: Powertrain / Engine / Utility / All Readiness.

  21. Input the DTC: P11EA00, P11EB00, P11EC00, P11ED00, P11EE00, P11EF00, P11F000, P11F100, P219A00, P219B00, P219C00, P219D00, P219E00, P219F00, P21A000 or P21A100.

  22. Check the DTC judgment result.

    GTS Display Description
    NORMAL

    • DTC judgment completed

    • System normal
    ABNORMAL

    • DTC judgment completed

    • System abnormal
    INCOMPLETE

    • DTC judgment not completed

    • Perform driving pattern after confirming DTC enabling conditions

    Tech Tips


    • If the judgment result is NORMAL, the system is normal.

    • If the judgment result is ABNORMAL, the system has a malfunction.

    • If the judgment result is INCOMPLETE, perform the confirmation driving pattern and check the judgment result again.

CAUTION / NOTICE / HINT

Tech Tips


  • Bank 1 refers to the bank that includes the No. 1 cylinder*.

    *: The No. 1 cylinder is the cylinder which is farthest from the transmission.

  • Bank 2 refers to the bank that does not include the No. 1 cylinder.

  • Sensor 1 refers to the sensor closest to the engine assembly.

  • Sensor 2 refers to the sensor farthest away from the engine assembly.

  • When any air-fuel ratio imbalance is detected, the ECM will perform air-fuel ratio feedback control to make the air-fuel ratio close to the stoichiometric level. This may result in an air-fuel ratio imbalance of normal cylinders and DTCs may be stored.

  • Whether malfunctions occur on the port injection side or direct injection side cannot be determined solely by the output DTCs. Inspect every suspected area even if it is not related to the DTCs.

  • Read Freeze Frame Data using the GTS. The ECM records vehicle and driving condition information as Freeze Frame Data the moment a DTC is stored. When troubleshooting, Freeze Frame Data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, if the air fuel ratio was lean or rich, and other data from the time the malfunction occurred.

PROCEDURE


  1. CHECK ANY OTHER DTCS OUTPUT


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Powertrain / Engine / Trouble Codes.

    5. Read the DTCs.


      Powertrain > Engine > Trouble Codes
      Result
      Result Proceed to
      DTC P11EA00, P11EB00, P11EC00, P11ED00, P11EE00, P11EF00, P11F000, P11F100, P219A00, P219B00, P219C00, P219D00, P219E00, P219F00, P21A000 and/or P21A100 is output A
      DTC P11EA00, P11EB00, P11EC00, P11ED00, P11EE00, P11EF00, P11F000, P11F100, P219A00, P219B00, P219C00, P219D00, P219E00, P219F00, P21A000 and/or P21A100 and other DTCs are output B

      Tech Tips

      If any DTCs other than DTC P11EA00, P11EB00, P11EC00, P11ED00, P11EE00, P11EF00, P11F000, P11F100, P219A00, P219B00, P219C00, P219D00, P219E00, P219F00, P21A000 and/or P21A100 are output, troubleshoot those DTCs first.


    B

    GO TO DTC CHART Click here

    A

  2. READ VALUE USING GTS (FREEZE FRAME DATA)


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Using the GTS, confirm the vehicle conditions recorded in the Freeze Frame Data which were present when the DTC was stored.

      Click here


        Freeze Frame Data Items for DTC P11EA00, P11EB00, P11EC00, P11ED00, P11EE00, P11EF00, P11F000, P11F100, P219A00, P219B00, P219C00, P219D00, P219E00, P219F00, P21A000 or P21A100

      • Vehicle Speed

      • Engine Speed

      • Calculate Load

      • Accelerator Position

      • Short FT B1S1

      • Long FT B1S1

      • Short FT B2S1

      • Long FT B2S1

      • Misfire Count Cylinder #1 to #6

      Tech Tips

      When the sum of Short FT B1S1 (B2S1) and Long FT B1S1 (B2S1) is positive, the engine is running lean, and when the sum is negative, the engine is running rich.

      Air Fuel Ratio Sensor (Sensor 1) Monitoring Method (P11EA00, P11EB00, P219A00 and P219B00) Crankshaft Position Sensor Monitoring Method (P11EC00, P11ED00, P11EE00, P11EF00, P11F000, P11F100, P219C00, P219D00, P219E00, P219F00, P21A000 and P21A100) Note
      DTCs are output DTC is output (Only one DTC relating to a single cylinder is output) Malfunctioning of cylinders detected by the Crankshaft Position Sensor Monitoring Method is primarily suspected
      DTCs are output DTCs are output (Multiple DTCs relating to multiple cylinders are output) Malfunctioning of cylinders except ones detected by the Crankshaft Position Sensor Monitoring Method is primarily suspected.*
      DTCs are not output DTCs are output Malfunctioning of cylinders detected by the Crankshaft Position Sensor Monitoring Method is primarily suspected.
      DTCs are output DTCs are not output Malfunctioning of the bank detected by the Air Fuel Ratio Sensor (Sensor 1) Monitoring Method is primarily suspected.

      *: When any air-fuel ratio imbalance is detected, the ECM will perform air-fuel ratio feedback control to make the air-fuel ratio close to the stoichiometric level. This may result in an air-fuel ratio imbalance of normal cylinders and DTCs may be stored.

      Result
      Proceed to
      NEXT

    NEXT

  3. READ DTC OUTPUT


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Drive the vehicle in accordance with the driving pattern described in Confirmation Driving Pattern.

      Tech Tips


      • If any misfire count (Misfire Count Cylinder #1 to #6) increases while idling or driving the vehicle, proceed to step 6 (CHECK INTAKE SYSTEM).

      • Perform inspections while focusing on the cylinder whose misfire count has increased.

    5. Enter the following menus: Powertrain / Engine / Trouble Codes.

    6. Read the DTCs.


      Powertrain > Engine > Trouble Codes
      Result
      Result Proceed to
      P11EA00, P11EB00, P219A00 or P219B00 is output A
      DTC P219A00 or P219B00 and P219C00, P219D00, P219E00, P219F00, P21A000 or P21A100 is output B
      DTC P11EA00 or P11EB00 and P11EC00, P11ED00, P11EE00 or P11EF00, P11F000 or P11F100 is output
      DTC P11EC00, P11ED00, P11EE00, P11EF00, P11F000, P11F100, P219C00, P219D00, P219E00, P219F00, P21A000 and/or P21A100 is output

    B

    GO TO STEP 6 Click here

    A

  4. PERFORM ACTIVE TEST USING GTS (CONTROL THE INJECTION VOLUME)


    1. Connect the GTS to the DLC3.

    2. Start the engine and warm it up until the engine coolant temperature reaches 75°C (167°F) or higher.

    3. Turn the GTS on.

    4. Enter the following menus: Powertrain / Engine / Active Test / Control the Injection Volume / Data List / Misfire Count Cylinder #1 to #6.


      Powertrain > Engine > Active Test
      Active Test Display
      Control the Injection Volume
      Data List Display
      Misfire Count Cylinder #1
      Misfire Count Cylinder #2
      Misfire Count Cylinder #3
      Misfire Count Cylinder #4
      Misfire Count Cylinder #5
      Misfire Count Cylinder #6

      Tech Tips

      When the "Control the Injection Volume" Active Test is selected (injection volume is 0%), if a misfire count increases, proceed to step 6 (CHECK INTAKE SYSTEM).

    5. Perform the Control the Injection Volume operation with the engine idling.

    6. Check the misfire counts (Misfire Count Cylinder #1 to #6) while decreasing the injection volume in 5% increments.

      Result
      The cylinder whose misfire count has not increased can be assumed to be running rich. Therefore, perform inspections while focusing on that cylinder.
      Result
      Proceed to
      NEXT

    NEXT

  5. CHECK FOR EXHAUST GAS LEAK


    1. Check for exhaust gas leak.

      OK
      No gas leaks in exhaust system.

      Tech Tips

      Perform "Inspection After Repair" after repairing or replacing the exhaust system.

      Click here

      Result
      Proceed to
      OK
      NG

    NG

    REPAIR OR REPLACE EXHAUST SYSTEM

    OK

  6. CHECK INTAKE SYSTEM


    1. Check the intake system for vacuum leaks.

      Click here

      OK
      No leaks in the intake system.

      Tech Tips

      Perform "Inspection After Repair" after repairing or replacing the intake system.

      Click here

      Result
      Proceed to
      OK
      NG

    NG

    REPAIR OR REPLACE INTAKE SYSTEM

    OK

  7. INSPECT SPARK PLUG


    1. Inspect the spark plug of the cylinder causing the imbalance.

      Click here

      Tech Tips

      Perform "Inspection After Repair" after replacing the spark plug.

      Click here

      Result
      Proceed to
      OK
      NG

    NG

    REPLACE SPARK PLUG Click here

    OK

  8. CHECK FOR SPARK (SPARK TEST)


    1. Perform a spark test.

      Click here

      Tech Tips


      • If the result of the spark test is normal, proceed to the next step.

      • Perform "Inspection After Repair" after replacing the spark plug or ignition coil assembly.

        Click here

      Result
      Proceed to
      NEXT

    NEXT

  9. CHECK CYLINDER COMPRESSION PRESSURE


    1. Measure the cylinder compression pressure of the misfiring cylinder.

      Click here

      Tech Tips

      Perform "Inspection After Repair" after repairing or replacing the engine assembly.

      Click here

      Result
      Proceed to
      OK
      NG

    NG

    CHECK ENGINE TO DETERMINE CAUSE OF LOW COMPRESSION

    OK

  10. CHECK PORT FUEL INJECTOR ASSEMBLY OF CYLINDER CAUSING IMBALANCE


    1. Check the port fuel injector assembly injection [whether fuel volume is high or low, and whether injection pattern is poor].

      Click here

      Tech Tips

      Perform "Inspection After Repair" after replacing the port fuel injector assembly.

      Click here

      Result
      Proceed to
      OK
      NG

    NG

    REPLACE PORT FUEL INJECTOR ASSEMBLY Click here

    OK

  11. CHECK DIRECT FUEL INJECTOR ASSEMBLY OF CYLINDER CAUSING IMBALANCE


    1. Check the direct fuel injector assembly.

      Click here

      Tech Tips

      Perform "Inspection After Repair" after replacing the direct fuel injector assembly.

      Click here

      Result
      Proceed to
      OK
      NG

    NG

    REPLACE DIRECT FUEL INJECTOR ASSEMBLY Click here

    OK

  12. CHECK FOR CAUSE OF FAILURE


    1. If the cause of the problem has not been found even after performing the troubleshooting procedure, perform the inspection below.

    2. Check the intake valve for deposits.

      Tech Tips

      As the DTC may have been stored due to deposits on the intake valve, remove the cylinder head sub-assembly and check the intake valve.

      Result
      Proceed to
      NEXT

    NEXT

  13. CLEAR DTC


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Clear the DTCs.


      Powertrain > Engine > Clear DTCs

    5. Turn the engine switch off and wait for at least 30 seconds.

      Result
      Proceed to
      NEXT

    NEXT

  14. CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED


    1. Drive the vehicle in accordance with the driving pattern described in Confirmation Driving Pattern.

    2. Enter the following menus: Powertrain / Engine / Trouble Codes.

    3. Check for DTCs.


      Powertrain > Engine > Trouble Codes
      Result
      DTCs are not output.
      Result
      Proceed to
      NEXT

    NEXT

    END