SHIFT PADDLE SWITCH INSTALLATION

PROCEDURE

  1. INSTALL SHIFT PADDLE SWITCH

    1. Connect the 2 shift paddle switch connectors.

    2. C224820C07

      *a

      Band Clamp

      *b

      0 to 40°

      *c

      1 to 3 mm (0.0394 to 0.118 in.)

      *d

      Shift Paddle Switch Connector

      Install a new 2 band clamps as shown in the illustration.

    3. Engage the 3 clamps to install the No. 1 switch wire with the 2 shift paddle switches.

    4. Install the 2 shift paddle switches with the 2 screws.

      1.3 N*m

      13 kgf*cm

      12 in.*lbf

  2. INSTALL STEERING PAD SWITCH ASSEMBLY

    Click hereClick here

  3. INSTALL STEERING WHEEL ASSEMBLY

    Click hereClick here