HEADLIGHT DIMMER SWITCH INSPECTION

PROCEDURE

  1. INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY

    1. E223779C95

      *A

      w/ Automatic Light Control

      *B

      w/ Front Fog Light

      *a

      Component without harness connected

      (Headlight Dimmer Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Table 1. Light Control Switch

      Tester Connection

      Condition

      Specified Condition

      18 (T) - 12 (EL)

      Light control switch off

      10 kΩ or higher

      19 (A) - 12 (EL)*1

      10 kΩ or higher

      20 (H) - 12 (EL)

      10 kΩ or higher

      20 (H) - 18 (T)

      10 kΩ or higher

      19 (A) - 18 (T)*1

      10 kΩ or higher

      20 (H) - 19 (A)*1

      10 kΩ or higher

      18 (T) - 12 (EL)

      Light control switch in tail position

      Below 1 Ω

      18 (T) - 12 (EL)

      Light control switch in head position

      Below 1 Ω

      20 (H) - 12 (EL)

      Below 1 Ω

      18 (T) - 20 (H)

      Below 1 Ω

      19 (A) - 12 (EL)*1

      Light control switch in AUTO position

      Below 1 Ω

      Table 2. Dimmer Switch

      Tester Connection

      Condition

      Specified Condition

      16 (HL) - 12 (EL)

      Dimmer switch in low position

      Below 1 Ω

      11 (HU) - 12 (EL)

      Dimmer switch in high position

      Below 1 Ω

      11 (HU) - 12 (EL)

      Dimmer switch in high flash position

      Below 1 Ω

      17 (HF) - 12 (EL)

      Below 1 Ω

      11 (HU) - 17 (HF)

      Below 1 Ω

      Table 3. Turn Signal Switch

      Tester Connection

      Condition

      Specified Condition

      13 (TR) - 12 (EL)

      Turn signal switch in neutral position

      10 kΩ or higher

      15 (TL) - 12 (EL)

      10 kΩ or higher

      14 (CR) - 12 (EL)

      10 kΩ or higher

      13 (TR) - 15 (TL)

      10 kΩ or higher

      14 (CR) - 15 (TL)

      10 kΩ or higher

      13 (TR) - 14 (CR)

      10 kΩ or higher

      13 (TR) - 12 (EL)

      Turn signal switch in right turn position

      Below 1 Ω

      13 (TR) - 12 (EL)

      Turn signal switch in full right turn position

      Below 1 Ω

      14 (CR) - 12 (EL)

      Below 1 Ω

      13 (TR) - 14 (CR)

      Below 1 Ω

      15 (TL) - 12 (EL)

      Turn signal switch in left turn position

      Below 1 Ω

      15 (TL) - 12 (EL)

      Turn signal switch in full left turn position

      Below 1 Ω

      14 (CR) - 12 (EL)

      Below 1 Ω

      15 (TL) - 14 (CR)

      Below 1 Ω

      Table 4. Fog Light Switch

      Tester Connection

      Condition

      Specified Condition

      4 (BFG) - 3 (LFG)*2

      Fog light switch off

      10 kΩ or higher

      2 (B) - 3 (LFG)

      10 kΩ or higher

      4 (BFG) - 2 (B)*2

      10 kΩ or higher

      4 (BFG) - 3 (LFG)*2

      Fog light switch in front position

      Below 1 Ω

      2 (B) - 3 (LFG)

      Fog light switch in rear position

      Below 1 Ω

      4 (BFG) - 3 (LFG)*2

      Below 1 Ω

      4 (BFG) - 2 (B)*2

      Below 1 Ω

      • *1: w/ Automatic Light Control

      • *2: w/ Front Fog Light

      If the result is not as specified, replace the headlight dimmer switch assembly.