FUEL FILTER REPLACEMENT

CAUTION / NOTICE / HINT

Note:

When working on the fuel circuit, protect the generator assembly against dirt contamination.

Cover the generator assembly with suitable materials.

Failure to comply with this procedure may result in a generator assembly malfunction.

PROCEDURE

  1. REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE ASSEMBLY

    Click here

  2. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

  3. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  4. REMOVE FUEL FILTER ASSEMBLY

    1. A321537

      Remove the 2 nuts and No. 1 fuel filter protector.

    2. Remove the No. 2 fuel pipe clamp from the No. 1 fuel hose.

    3. A316284

      Disconnect the No. 1 fuel hose and No. 3 fuel hose from the fuel filter assembly (Click here).

    4. A316285

      Disconnect the connector from the fuel filter assembly.

    5. Remove nut and fuel filter assembly from the fuel filter support.

    6. A316286

      Remove the bolt and fuel filter cover from the fuel filter assembly.

  5. DRAIN FUEL

    1. Loosen the drain cock and drain the fuel from the fuel filter assembly.

  6. INSTALL FUEL FILTER ASSEMBLY

    1. Install the fuel filter cover to a new fuel filter assembly with the bolt.

      7.0 N*m

      71 kgf*cm

      62 in.*lbf

    2. Install the fuel filter assembly to the fuel filter support with the nut.

      18 N*m

      178 kgf*cm

      13 ft.*lbf

    3. Connect the connector to the fuel filter assembly.

    4. Connect the No. 1 fuel hose and No. 3 fuel hose to the fuel filter assembly (Click here).

    5. Install the No. 2 fuel pipe clamp to the No. 1 fuel hose.

    6. Install the No. 1 fuel filter protector with the 2 nuts.

      18 N*m

      178 kgf*cm

      13 ft.*lbf

  7. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  8. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

  9. INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE ASSEMBLY

    Click here

  10. INSPECT FOR FUEL LEAK

    Click here