STEERING ANGLE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL STEERING SENSOR


    1. A004H2BE01
      Text in Illustration
      *1 Guide
      *2 Pin

      Align the 2 pins and 2 guides, and engage the 6 claws to install the steering sensor to the spiral cable sub-assembly.

      Note

      Do not rotate the spiral cable until the steering sensor has been attached to it.

  2. ALIGN FRONT WHEELS TO FACE STRAIGHT AHEAD

  3. INSTALL SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY

    Click here

  4. INSTALL UPPER STEERING COLUMN COVER

    Click here

  5. INSTALL LOWER STEERING COLUMN COVER

    Click here

  6. INSTALL STEERING COLUMN COVER SUPPORT (w/ Entry and Start System)

    Click here

  7. INSTALL UPPER INSTRUMENT PANEL METER ORNAMENT

    Click here

  8. INSTALL METER HOOD SUB-ASSEMBLY

    Click here

  9. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  10. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Knee Airbag)

    Click here

  11. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/o Knee Airbag)

    Click here

  12. REMOVE AND INSTALL INSTRUMENT SIDE PANEL (w/o Knee Airbag)

    Click here

  13. INSPECT AND ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY

    Click here

  14. INSTALL STEERING WHEEL ASSEMBLY

    Click here