PRE-COLLISION SYSTEM WARNING BUZZER INSPECTION

PROCEDURE

  1. INSPECT PRE-COLLISION CITY BUZZER

    1. B376959E04

      Apply battery voltage and check the operation of the pre-collision city buzzer according to the table below.

      OK

      Measurement Condition

      Specified Condition

      Battery positive (+) → Terminal 2 (IG1)

      Battery negative (-) → Terminal 1 (BZ)

      Pre-collision city buzzer sounds

      If the result is not as specified, replace the pre-collision city buzzer.

      Table 1. Text in Illustration

      *a

      Component without harness connected

      (Pre-collision City Buzzer)