REAR CROSS TRAFFIC ALERT BUZZER INSTALLATION

PROCEDURE

  1. INSTALL BLIND SPOT MONITOR BUZZER

    1. Attach the clamp to install the blind spot monitor buzzer.

    2. Connect the connector.

  2. INSTALL REAR QUARTER TRIM PANEL ASSEMBLY LH

    Click here

  3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

  4. INSTALL REAR SEATBACK LOCK CONTROL LEVER BASE LH (w/o Rear No. 2 Seat)

    Click here

  5. INSTALL ASSIST GRIP SUB-ASSEMBLY (w/ Rear No. 2 Seat)

    Click here

  6. INSTALL ASSIST GRIP PLUG (w/ Rear No. 2 Seat)

    Click here

  7. INSTALL FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)

    Click here

  8. INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

    Click here

  9. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

  10. INSTALL REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

    Click here

  11. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  12. INSTALL REAR FLOOR CARPET ASSEMBLY (w/o Rear No. 2 Seat)

    Click here

  13. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat)

    Click here

  14. INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Rear No. 2 Seat)

    Click here

  15. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat)

    Click here

  16. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  17. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

  18. INSTALL QUARTER SCUFF PLATE LH (w/ Rear No. 2 Seat)

    Click here

  19. INSTALL REAR NO. 1 FLOOR STEP COVER (w/ Rear No. 2 Seat)

    Click here

  20. INSTALL REAR NO. 1 SEATBACK ASSEMBLY

    1. for 60/40 Split Double-folding Seat Type LH Side:

      Install the rear No. 1 seatback assembly (Click here).

    2. for 60/40 Split Double-folding Seat Type RH Side:

      Install the rear No. 1 seatback assembly (Click here).

  21. INSTALL REAR NO. 1 SEAT ASSEMBLY

    1. for 60/40 Split Slide Walk-in Seat Type LH Side:

      Install the rear No. 1 seat assembly (Click here).

    2. for 60/40 Split Slide Walk-in Seat Type RH Side:

      Install the rear No. 1 seat assembly (Click here).

  22. INSTALL REAR NO. 2 SEAT ASSEMBLY

    1. Install the rear No. 2 seat assembly (Click here).

  23. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click hereClick hereClick here).