MANIFOLD ABSOLUTE PRESSURE SENSOR REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  2. REMOVE NO. 2 ENGINE UNDER COVER

    Click here

  3. REMOVE NO. 1 TURBO PRESSURE SENSOR


    1. B007WVI

      Disconnect the No. 1 turbo pressure sensor connector.

    2. Remove the bolt and No. 1 turbo pressure sensor from the intake manifold.

      Note

      If the No. 1 turbo pressure sensor has been struck or dropped, replace it.

  4. REMOVE NO. 2 TURBO PRESSURE SENSOR


    1. B007XA7

      Disengage the clamp.

    2. Slide the hose clamp and disconnect the vacuum hose from the intake manifold.

    3. B007XDI

      Disconnect the No. 2 turbo pressure sensor connector.

    4. Remove the bolt and No. 2 turbo pressure sensor from the intake manifold.

      Note

      If the No. 2 turbo pressure sensor has been struck or dropped, replace it.

    5. B007XX3

      Slide the hose clamp and disconnect the vacuum hose from the No. 2 turbo pressure sensor.